We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
SKF 6203-2RSHNR/GJN deep groove ball bearing, 17mm bore, 1.575 in OD, double sealed with low-friction NBR seals, snap ring groove, pressed steel cage, normal clearance, pre-lubricated with polyurea grease (GJN) for electric motor applications. Suitable for pumps, fans, and general industrial machinery.
MODEL 6203-2RSHNR/GJN
$17.26 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Cage
Steel
Clearance
Normal
I.D.
0.669 in
O.D. (in)
1.575
Pack Height
52 mm
Pack Length
50 mm
Pack Width
19 mm
Bearings
- SKF 6203-2RSHNR/GJN Single Row Ball Bearing The SKF 6203-2RSHNR/GJN Single Row Ball Bearing is a high-performance component designed for a variety of applications, delivering exceptional reliability and efficiency. As a part of SKF's renowned 6200 series, this bearing is engineered to withstand the demands of modern machinery while ensuring optimal performance.
Key Features
- Design: Single row ball bearing with a robust design, optimized for radial loads and moderate axial loads in both directions.
- Sealing: Equipped with double rubber seals (2RSH) that provide excellent protection against contaminants, ensuring longevity and reducing maintenance needs.
- Material: Constructed from high-quality steel, offering superior strength and durability, minimizing wear during operation.
- Dimensions: Inner diameter of 17 mm, outer diameter of 40 mm, and a width of 12 mm, making it compatible with a wide range of applications.
- Load Ratings: Dynamic load rating of 10.5 kN and static load rating of 6.1 kN, ensuring high performance under various load conditions.
Applications
- Automotive: Ideal for use in vehicle wheel hubs, electric motors, and other rotating equipment, where precision and reliability are critical.
- Industrial Equipment: Suitable for applications in machinery, conveyor systems, and material handling equipment, providing reliable operation in demanding environments.
- Compatibility: Designed to fit various mounting configurations, this bearing can be easily integrated into existing systems, enhancing operational efficiency.
Benefits
- Enhanced Reliability: The SKF 6203-2RSHNR/GJN is designed to minimize the risk of failure, reducing downtime and maintenance costs.
- Longevity: With its double-sealed design, this bearing protects against dust and moisture ingress, extending service life significantly.
- Improved Performance: The high-quality materials and precision engineering contribute to smoother operation, reducing friction and energy consumption.
Product information compiled with AI assistance for reference purposes.
SKU: 315294
Bearing
Old hard to find bearing for a 85 year old tractor. Fit perfect and price was great.
Read moreSKU: 2067505
Skf 6205-2z/gjn
Item is exactly what I was looking for. Like always you get high quality with SKF
Read moreSKU: 319331
Agradecimiento.
Excelente servicio, confiable, rápido y efectivo. Los seguiré llamando para mis necesidades.
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What are the dimensions and typical uses of a 6200 series ball bearing?
A standard 6200 ball bearing has: • 10 mm bore • 30 mm outer diameter • 9 mm width The 6200 series sits within the deep groove ball bearing family and is designed for light to moderate loads at relatively high speeds. You’ll typically find them in electric motors, small gearboxes, pumps, and general industrial equipment. They’re popular because they’re compact, widely available, and cost effective. Different variants exist such as sealed, shielded, or high clearance versions, depending on the application.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
| Brand | MRO Supply |
| Model | 6400-04-03-O-SS |
| Brand | MRO Supply |
| Model | FS2408-12 |
SKU: 315294
Bearing
Old hard to find bearing for a 85 year old tractor. Fit perfect and price was great.
Read moreSKU: 2067505
Skf 6205-2z/gjn
Item is exactly what I was looking for. Like always you get high quality with SKF
Read moreSKU: 319331
Agradecimiento.
Excelente servicio, confiable, rápido y efectivo. Los seguiré llamando para mis necesidades.
Read moreDisclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF