We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
NTN 49585 is an inch-series single row tapered roller bearing with a straight bore. Designed for radial and axial load combinations in industrial gearboxes, vehicle hubs, and conveyor systems.
MODEL 49585
$74.91 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Height
4
I.D.
2 in
Length
4
O.D.
4 in
Width
1.25
Technical Specifications
| Type | Cone |
|---|---|
| Bore Type | Round |
| Material | Case Carburized Steel |
| Static Load Rating | 35000 lbf156000 N156.00 kN |
| Dynamic Load Rating | 27400 lbf122000 N122.00 kN |
| Operating Temperature Range | -40 to 250 F-40 to 120 C |
| Y2 (Axial Load Factor) | 1.5 |
| e (Axial Load Factor) | 0.40 |
Dimensional Specifications
| |
| B | 2.0000 in50.800 mm |
|---|---|
| Wi | 1.2500 in31.750 mm |
| R | 0.1400 in3.600 mm |
| U | 2.60 in66.0 mm |
| V | 2.32 in59.0 mm |
| a (Effective Load Center) | -0.2800 in-7.100 mm |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | MRO Supply |
| Model | MRO Safety Vest XL |