We never sell your data to third parties
Dodge 119410 1008 Taper-Lock bushing in stainless steel with rough bore for shaft diameters from 1/2" to 7/8". Rated for 1200 lbf torque and 55 in/lb installation torque, with 0.870" bore length. Split taper design ensures easy installation and removal on keyed shafts.
MODEL 119410
Contact supplier for technical support on: +1-864-284-5700
$116.76 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Bore dia max
0.8750 in
Bore dia min
0.5000 in
Bore length
0.8700 in, 22.098 mm
Bushing size
1008
Bushing type
Taper-lock
Installation torque
55 in/lb, 55.0 in/lb
Integral key
No
Material
Stainless steel
Number of bolts
2
Rated Torque
1200.0000 lbf, 5337.866 N
Shaft attachment
Rough bore
TAPER-LOCK Bushings features and benefits
Simple Mounting
- Easy On
- Insert bushing into sprocket
- Match holes (not threads).
- Put screws into holes that are farthest apart
- Slip entire unit onto shaft
- Set drive alignment and tighten screws
- Easy Off
- Take both screws out entirely
- Insert one screw into hole that is threaded in the bushing only
- Use as jackscrew to disengage bushing
- Clean, Compact Design
- An Industry Standard for over 40 years
- Easy-on, Easy-off
- 8° Taper-Grips Tight, Holds Tight, Runs True, No Wobble
- Total System Concept: Bushings, Hubs, Adapters and Products
- Flush Mounting-No Protruding Parts
- Diamond Integral Key for Added Value and Convenience
IMPORTANT!
| Brand | Alvord-Polk Tool |
| Model | C-ACBTS-04 |
| Brand | Dichtomatik |
| Model | VS-008-BX |
| Brand | Warner Electric |
| Model | 7330-448-002 |
| Brand | FK Bearing |
| Model | SCF4T |
| Brand | Bestorq |
| Model | C82 |
Item must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/