We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Fenner Industrial Motion B401055 B-LOC B400 55 mm
MODEL B401055
Contact supplier for technical support on: 800 243 3374
$65.95 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Axial Movement
No
Bore Diameter
55 mm
Bore tolerance
85.08
Component Bore Diameter
85mm
Finish
Oil Dipped
Hub Contact Pressure
164 N/sq-mm
Hub Diameter
153 mm
Hub Pressure
164
Installation torque
35 Nm
Internal/ External
Internal
Material
Steel
O.D.
85 mm
Overall Length
32 mm
Releasing/ Locking
Releasing
Screw size
M8 x 22
Self-Centering
No
Series
B400
Shaft diameter
55mm
Shaft Tolerance
54.92
Taper
Double
Thrust
105083
Torque Transmission
2889
Transmissible Thrust
105083 N
Transmissible Torque
2889 N-m
The B-LOC B400 Series 55mm Keyless Bushing provides a high capacity, zero-backlash shaft to hub connection for shafts measuring 55mm in diameter by means of a mechanical interference fit and transmits up to a maximum of 2889 Nm of torque.
Best Suited For:
Applications that require a recessed installation of the bushing with no axial movement of the mounted component relative to the shaft during tightening.
B-LOC B400 Series 55mm Keyless Bushings provide a zero-backlash frictional connection that will never wear or pound out and can accommodate high-torque, thrust, bending, and/or radial loads. Their self-releasing double taper design permits simple adjustment and removal and there is no axial movement during installation. Since the B-LOC B400 Series Keyless Bushings do not have a flange, the external diameter along the unit’s entire length is the same, therefore allowing the unit to be completely inserted into the component bore for flushed or recessed mounting.Self-releasing double taper design permits simple adjustment and removal. No axial movement during installation. Recessed installation without the need for a counterboreNote: This product is not self-centering but Fenner offers pilot bushings that provide pre-centering when required. The pilot bushings are supplied in sets of three (3) bushings and three (3) longer screws (replace plated locking screws).Features of Fenner Keyless Bushings:
Ability to transmit higher torques. True zero-backlash. Less equipment downtime. Ability to mount over existing keyways. Complete axial and radial adjustability. Simple installation, adjustment and removalAll Fenner keyless locking devices operate using the simple wedge principle. An axial force is applied- by either a hex nut (Trantorque) or a series of annular screws (B-LOC)- to engage circular steel rings with mating tapers. The resulting wedge action creates a radial force on the tapered rings, one of which contracts to squeeze the shaft while the other expands and presses into the component bore.
SKU: 154896
Cutting and purchasing manager
The only problem I had they did not tell me it was shipping.
Read more
#817788
Brand
Fenner Industrial Motion
Model
B401055
#818100
Brand
Fenner Industrial Motion
Model
T301055
#817654
Brand
Fenner Industrial Motion
Model
B121055
#817852
Brand
Fenner Industrial Motion
Model
B601055
#1436089
Brand
Fenner Industrial Motion
Model
6202900UP
| Brand | Dichtomatik |
| Model | 75186379 |
| Brand | Remke |
| Model | 504C0131L |
| Brand | Allen Bradley |
| Model | 800FD-P3N5R |
| Brand | Hubbell Wiring |
| Model | HBT0618SBK |
| Brand | INA Bearing |
| Model | GE160DO |
| Brand | Consolidated Bearings |
| Model | 81234 M |
| Brand | Hubbell Wiring |
| Model | HBL6750C13IV |
| Brand | Consolidated Bearings |
| Model | AT-605 |
SKU: 154896
Cutting and purchasing manager
The only problem I had they did not tell me it was shipping.
Read moreItem must be unused.
Item must be in it's original package.
Restocking, shipping and handling fees may apply to any return with this manufacturer.
For more information please consult https://www.mrosupply.com/page/returnwarranty-policy/