We never sell your data to third parties
Fenner Industrial Motion T402708 B-LOC B400 7-1/2"
Save 1.0% with Climax Metal C200E-750
Direct drop-in replacement — MROSupply.com preferred brand for this item.
SEE Climax Metal DROP-IN REPLACEMENTMODEL T402708
Contact supplier for technical support on: 800 243 3374
$739.25 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Returnable:No
Brand
Hub City
Model
0332-00028
Brand
Isostatic
Model
EP243232
Brand
Isostatic
Model
EP222832
Bore Diameter
7-1/2 in
Hub Contact Pressure
22473 psi
Hub Diameter
17 in
Material
Steel
Outside Diameter
9.823 in
Overall Length
2.598 in
Screw Size
M14x45
Series
B400
Transmissible Thrust
150716 lb
Transmissible Torque
47099 ft-lb
BUSHINGS - FENNER T402708 B-LOC B400 7-1/2" The Fenner T402708 B-LOC B400 is a premium screw-locking bushing designed for optimal performance in power transmission applications. Engineered with precision, this bushing provides a secure connection that eliminates the need for traditional fasteners, enhancing reliability and simplifying assembly processes.
Key Features
| Diameter | 7-1/2" (190.5 mm) ensuring compatibility with a wide range of applications. |
|---|---|
| Material | Constructed from high-quality steel, offering superior strength and durability under demanding conditions. |
| Design | Screw-locking mechanism that enables easy installation and removal while maintaining a robust connection. |
| Load Capacity | Designed to handle significant loads, making it suitable for heavy-duty applications. |
| ISO 9001 Certified | Manufactured in compliance with international quality standards, reflecting Fenner Drives' commitment to excellence. |
Applications
| Power Transmission | Ideal for use in machinery requiring reliable and secure connections in rotating assemblies. |
|---|---|
| Industrial Equipment | Compatible with conveyor systems, motors, and other mechanical systems that demand high-performance bushings. |
| Maintenance and Repair Operations (MRO) | An essential component for maintenance professionals seeking durable and efficient solutions. |
Benefits
| Enhanced Reliability | The screw-lock design provides a dependable connection, reducing the risk of component failure during operation. |
|---|---|
| Simplified Assembly | Easy to install and remove, facilitating quicker maintenance and reduced downtime. |
| Versatile Use | Suitable for various applications across multiple industries, making it a valuable addition to any maintenance toolkit. |
No questions match your search.
Should I use a Trantorque, a B-LOC bushing, a shrink disc or a compression hub? This product
Fenner splits these into internal and external devices. Trantorque and B-LOC bushings are internal, fitting between shaft and bore. Trantorque uses a single hex nut and reaches 3 in (75 mm) shafts; B-LOC uses several screws and approaches 24 in (600 mm). Fenner's technical team usually recommends Trantorque up to 1-1/2 in and B-LOC above that. Shrink discs and compression hubs are external. Shrink discs suit standard coupling hubs, flanges and hollow-shaft gearbox outputs, while compression hubs suit narrow components such as plate sprockets. For a small OD to ID ratio consider B800 or Trantorque OE; for very high torque, double taper B112 or B115.
What shaft and bore finish and tolerance do Fenner keyless devices need? This product
For keyless bushings Fenner recommends 32 to 125 micro-inch (0.8 to 3.2 micrometer) RMS on shaft and hub bore; compression hubs use the same range on the shaft. Turned, ground and polished stock is too smooth and can cause failure, so roughen it lengthwise with a file or emery paper. Tolerance varies by series: plus or minus 0.003 in on Trantorque GT and OE, 0.0015 in on Mini and 0.001 in on B-LOC B109, while B103 shafts are +0/-0.002 in on bores up to 4.724 in. Shrink discs instead set a maximum clearance between shaft and hub bore, from 0.025 mm on small shafts.
Do I oil or degrease before installing a Fenner keyless device? This product
It depends on the family. Trantorque: install as received, add no lubricant, and clean shaft and bore to bare metal with a non-petroleum solvent such as isopropyl alcohol. B-LOC bushings and compression hubs: these come lightly oiled, and the screws, tapers, shaft and bore should be clean and lightly oiled with no molybdenum disulfide. Shrink discs: these come with molybdenum disulfide on the tapers and screws; oil the hub OD lightly but clean all lubricant from the shaft and hub bore, because it greatly reduces torque capacity. On every family, do not use anaerobic adhesives such as Loctite or Permatex.
How do I tighten a Trantorque or B-LOC, and will the hub move along the shaft? This product
Trantorque: hand tighten the single nut, then use a torque wrench to the listed torque, for example 125 ft-lb on a 1 in GT. Over-tightening can damage the unit. At full torque GT and OE travel about 0.075 in along the shaft, Mini about 0.045 in and NT not at all. B-LOC devices: set the wrench about 5 percent above the listed torque, tighten screws in quarter turns over several passes, add one or two passes once quarter turns stop, then reset to listed torque and check that no screw turns. B103 moves about 0.032 in; B106, B112, B115 and B400 do not. Never tighten shrink disc screws before fitting the shaft.
How do I read Fenner keyless part numbers? This product
Fenner's Metals catalog lists part numbers in size tables and prints a key only for compression hubs, where BCH502100-025 is base BCH502100 (BCH50, 1 in shaft) plus 25 mm screws. Elsewhere, check your number against the table. B-LOC numbers usually show series, unit and size: B122400 is a B112 for 4 in, B122615 for 6-15/16 in, and B401050 a B400 for 50 mm. Fenner says the third digit on every B-LOC number gives the unit, 1 for metric and 2 for inch. B800 numbers vary, such as T8012 (12 mm) and T82206 (2-3/8 in). Shrink disc B0301 is size 30-10, in SD10 standard duty. TTQM2235 is a Trantorque OE for a 22 mm shaft and 35 mm OD; EN, DC and SS mean nickel plated, chrome coated and stainless, and UP on a Trantorque GT means un-plated, shipped lightly greased.
Cutting and purchasing manager
Verified · SKU 154896The only problem I had they did not tell me it was shipping. Read more
Great value
Verified · SKU 154879Same product I got from other vendors without the price gouging. Great site. Read more
Round belts
Verified · SKU 154986These belt work exceptionally well for sewing machine applications. Very easy to change and are easily modified to fit any length. Excellent durability when it comes to industrial use sewing machines. We typically get several months(4-7) of use before replacement/modification is required. Read more
One of my best suppliers
Verified · SKU 154593Great and fast service, product quality is so good! Read more
Brand
BLACKSTAR
Model
BLS H40BS18 1 7/16 K2S
Brand
Dixon
Model
150DC-LAL
Brand
Martin Sprocket
Model
SDS 3/4
Brand
Boston Gear
Model
M2436-52
Brand
Enerpac
Model
SRS-200TB
Brand
Jason Industrial
Model
3836V654
Brand
BLACKSTAR
Model
BLS H50BS12 1 1/4 K2S
Item must be unused.
Item must be in it's original package.
Restocking, shipping and handling fees may apply to any return with this manufacturer.
For more information please consult https://www.mrosupply.com/page/returnwarranty-policy/