We never sell your data to third parties
Formsprag CL41225-2GRRH FSR-10/1.125GRRH sprag backstop clutch with a 1.125-inch bore. This self-contained backstop is pre-greased and configured for right-hand free-running direction. Designed for inclined conveyor, bucket elevator, and hoist backstopping applications to prevent reverse rotation under load.
MODEL CL41225-2GRRH
Contact supplier for technical support on: 800-626-2120
$1,469.29 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Bore Diameter
1-1/8 in
Grease lubrication
Yes
Outside Diameter
3-3/4 in
Overall Length
3-1/2 in
Right hand rotation
Yes
Sleeve bearing supported designs
Yes
Torque Rating
675 ft-lb
Year
1
Altra Industrial Motion Formsprag Clutch&Reg; CL41225-2GRRH
UPC: 786582298409 | UNSPSC: 26111910 | GTIN:
Clutches & Brakes > Mechanical Clutches & Brakes > Mechanical Clutches
Formsprag Clutch® Formchrome® Sprag Clutch, Series: FSR-10, 1-1/8 in Bore, 3-3/4 in OD, 3-1/2 in Overall Length, 675 ft-lb Torque, 1250 rpm Inner/350 rpm Outer Race Maximum, Vertical (Zero-U) Mounting
Features:
- All FSR model clutches incorporate Formchrome® sprags
- Sleeve bearing supported designs
- Grease lubrication
- Formsprag Clutch® recommends the use of our HPI series for indexing rates in excess of 150 strokes per minute or indexing angles in excess of 90 deg
- Right hand rotation
Specs:
- Torque Rating: 675 ft-lb
- Mounting Type: Vertical (Zero-U)
- Bore Diameter: 1-1/8 in
- Outside Diameter: 3-3/4 in
- Overall Length: 3-1/2 in
- Maximum Speed: 1250 rpm Inner/350 rpm Outer Race
- Series: FSR-10
Packaging:
- Weight: 6.0 lb
Warranty:
1 Year
