Categories

Subtotal

View cart
Add products to your shopping cart
#341227

Image for Illustration purposes only. Actual product may vary

  • BRAND:
  • SKU: 341227
  • CONDITION: NEW
  • MODEL: WE50

TBWOODS WE50 WE50 STD D-FLEX ELMT

$235.42 Each

NEW

  • Typically ships in: 1 day
  • Weight: 9.0 lb
  • Free shipping on orders over $20

Select Quantity

Additional Description

Specifications
UPC698672118767
Unit Of MeasureEnglish
Material TypePolyether Urethane
Coupling SizeWE50
Capscrew Torque Requirement ft lbs30 (Must use TB Wood's Capscrews)
Capscrews3/8-16 UNC x 5/8
Component Weight lbs9.00
DescriptionTB Wood’s Dura-Flex couplings are designed from the ground up using finite element analysis to maximize flex life. Perfect for a wide variety of applications -- including those with uniform to heavy shock loads -- Dura-Flex couplings employ a light weight element that absorbs shock loading and torsional vibration. These couplings are available in stock bore-to-size (BTS), Taper-Lock and Sure-Grip bushed (QD) hubs.
Drawing49808
Family ID2,006
Family NameDura-Flex Coupling
HP Rating 100 RPM12.0
HP Rating 1150 RPM140.0
HP Rating 1200 RPM146.0
HP Rating 1750 RPM212.0
HP Rating 1800 RPM218.0
HP Rating 300 RPM36.0
HP Rating 3450 RPM419.0
HP Rating 3600 RPM419.0
HP Rating 50 RPM6.1
HP Rating 690 RPM84.0
HP Rating 870 RPM106.0
Insert DesignStandard
Max RPM rpm4,200
Maximum Angular Misalignment
Maximum Parallel Misalignment in3/32
Outside Diameter D in11.34
Product FamilyDura-Flex Element
Product DescriptionStandard Two Piece Element
Stiffness in lbs rad123,000
Temperature Rating- 40Fº to 200Fº
Torque Rate in lbs7650
Width L in5.49

Return policy

Disclaimer: The return policy information shown below is merely a copy of the text as stated in TB Wood's Terms and Conditions.

File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Terms%20and%20Conditions.html

3. Claims for refunds or replacements must be made to the factory. Products may be returned only after written approval and a returned goods authorization number has been received from Customer Service or Application Engineering. Return shipments must be prepaid (Refer to Returned Goods Policy). Final decision about refund or replacement rests solely with TB Wood's Incorporated. 

--

Disclaimer: The return policy featured below is for distributors only. Also, it is merely a copy of the text from TB Wood's Distributor Policy and Procedures.

File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Distributor%20Policies%20and%20Procedures.pdf

Returned Goods
The policy for returning products for defects in workmanship or materials is covered under the “Product Reliability” section.

Distributors and, occasionally, OEMs may want to return products that are overstocked or slow moving. Prior approval and a returned goods authorization number must be obtained from Customer Service or Application Engineering. This number must be referenced on the returned goods shipment. It allows us to identify the contents of the shipment, the Distributor who originated it and the reason for return. Freight must be prepaid. 

Products returned for reasons other than factory authorized stock adjustments must have approval from Customer Service or Application Engineering and a returned goods authorization number. They must be sent by prepaid freight and will be subject to a 15% restocking charge. There will be additional charges as necessary for re-boxing and refurbishing. Returned goods must have been manufactured and/or sold by TB Wood’s Incorporated and must be in salable condition. They will be inspected at the factory and if reconditioning is necessary it will be charged to the Distributor. We reserve the right to reject unsalable products.

No products will be accepted for return or exchange if they are obsolete.

 

Product's availability

State of California Proposition 65 Product Warning