We never sell your data to third parties
Marathon U992B-P 10 HP, 1765 RPM three-phase explosion proof motor with a 215T NEMA frame and explosion proof fan cooled (XPFC) enclosure. Operates on 230/460V at 60 Hz with 1.00 service factor. UL listed for Class I Division 1 Groups C and D hazardous locations.
MODEL U992B-P
Contact supplier for technical support on: 715-675-8090
$2,854.80 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Enclosure
XPFC
Frame
215T
HP
10
Hz
60
Phase
3
RPM
1700 - 1800
Voltage
230/460
Marathon® AC Motor, 4-Pole Continuous-Duty Low Voltage, Explosion-Proof Motors Application, Squirrel Cage Inverter Rated Motors Special Features, 10 hp, 230/460 VAC, 26.6/13.3 A, 60 Hz Frequency, 3 ph ph, 1765 rpm Speed, 1 Speed, IP54 EPFC Enclosure, 215T Frame, 1-3/8 in Dia x 3.38 in L Extension Shaft, Reversible Rotation, 1.15 Service Factor, Deep Groove Ball Bearing, 29.8 ft-lb Full Load Torque, Rigid Base Mounting, 40 deg C, Insulation Class: Class F, Cast Iron, 2:1 Constant Torque Speed, 10:1 Variable Torque Speed, 22.63 in L x 17 in W x 12.92 in H Dimensions
Features:
- MAX GUARD® class F insulation system, internal and external epoxy paint
- Blue Chip® quality, 100% cast iron construction for rigidity and reduced vibration
- Motor will not accept a C-face kit, bearing current protection
- 1.15 service factor on sinewave, 1 service factor on IGBT power
- Precision balanced to 0.08 in/sec, extended grease tubes
- Normally closed thermostats (must be connected to control circuit)
- Shaft slinger, bearing current protection
Specs:
- Variable Torque Speed Range: 10:1
- Constant Torque Speed Range: 2:1
- Service Factor: 1.15
- Special Features: Squirrel Cage Inverter Rated Motors
- Application Type: Explosion-Proof Motors
- Insulation Class: Class F
- Shaft Size: 1-3/8 in Dia x 3.38 in L Extension
- Torque Rating: 29.8 ft-lb Full Load
- Phase: 3 ph
- Horsepower: 10 hp
- Number of Speeds: 1
- Rotation: Reversible
- Frame: 215T
- Bearing Type: Deep Groove Ball
- Temperature Rating: 40 deg C
- Enclosure Type: IP54 EPFC
- Speed: 1765 rpm
- Frequency Rating: 60 Hz
- Mounting Type: Rigid Base
- Amperage Rating: 26.6/13.3 A
- Voltage Rating: 230/460 VAC
- Dimensions: 22.63 in L x 17 in W x 12.92 in H
- Material: Cast Iron
- Type: 4-Pole Continuous-Duty Low Voltage
