We never sell your data to third parties
Marathon W575B-P 40 HP, 1200 RPM three-phase general purpose motor with a NEMA 364T frame and Totally Enclosed Fan Cooled enclosure. Operates on 460V at 60 Hz with 1.15 service factor. Designed for continuous duty industrial applications requiring reliable performance and energy efficiency.
MODEL 364THFCD9077
Contact supplier for technical support on: 715-675-8090
$9,184.59 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Ambient temperature (°C)
40
Assembly/box mounting
F1/F2 CAPABLE
CE
Y
Country of Origin
Mexico
CSA
Y
Current
48.0 A
Design code
B
Drive end bearing
Ball
Drive end bearing size
6313
Duty
Continuous
Efficiency
94.1 %
Electrical type
Squirrel Cage Inverter Rated
Enclosure
Totally enclosed fan cooled
Frame
364T
Frame Material
Cast iron
Frequency
60 Hz
Insulation class
H
Inverter Load
1
IP code
56
KVA code
G
Motor orientation
Horizontal
Mounting
Rigid base
Number of speeds
1
Opp drive end bearing
Ball
Opp drive end bearing size
6213
Output HP
40 Hp
Output KW
30.0 kW
Packaged height
28.00 IN
Packaged length
35.00 IN
Packaged width
35.00 IN
Phase
3
Poles
6
Power factor
82.5
Resistance main
.1664 Ohms
Rotation
Reversible
Service factor
1.15
Shaft diameter
2.375 in
Shaft type
T
Speed
1188 rpm
Starting method
Line Or Inverter
Thermal protection
No protection
UL
Recognized
Voltage
460 V
- Meets IEEE-841 standard for severe duty motor applications; Bearing current protection (BCP); Meets General Motors GM 7E-TA automotive duty specification and Meets IEEE45 USCG marine duty, API RPI4F for offshore platforms
- IP-56 cast iron, Meets or exceeds NEMA Premium efficiencies, NEMA Premium models are in compliance with EISA2007; Actual test and vibration data supplied with each motor
- MAX GUARD Class F Insulation System, Inverter duty 10:1 variable torque and 10:1 constant torque & 1.15 service factor on Sine Wave Power 1.0 SF on Inverter Power
- F1/F2 capable, Precision balanced to .08”/sec, Steel conduit box
- Inpro/Seal VBX bearing isolators on drive end shaft extension TENV and on both ends of TEFC
- Modifications and Kits are available
- 40°C Ambient 1.15SF Sine Wave Power and 1.0SF inverter power; NOTE: BCP (-P) models are not Hazardous Duty motors certified for Division 2 locations
- Provisions to add stub shaft for an encoder (182-449T, TEFC only, Modifications and Kits are available
- UL Recognized & CSA certified and CE Mark
SKU: 2303511
Marathon y543 shipping
The purchase from MRO went smoothly, and it arrived. However, the shipping department needs some remedial training. The box containing the motor was not strapped to the pallet, just set on top of it. As a result, the box rolled off the pallet and was split open. The freight company managed to wrap it up (upside down) with stretch film and put it back on the pallet, but it looked terrible. By a stroke of good fortune the motor was not damaged by this treatment and it looks OK. I can supply photos on request.
Read moreSKU: 2270613
Ordered new motor
New motor came within 3 days of ordering thanks for the perfect product and service
Read more
| Brand | WEG |
| Model | EMC GROUND KIT JN5-GK-L01 |
| Brand | Mitsubishi Electric |
| Model | MR-J2S-500B |
SKU: 2303511
Marathon y543 shipping
The purchase from MRO went smoothly, and it arrived. However, the shipping department needs some remedial training. The box containing the motor was not strapped to the pallet, just set on top of it. As a result, the box rolled off the pallet and was split open. The freight company managed to wrap it up (upside down) with stretch film and put it back on the pallet, but it looked terrible. By a stroke of good fortune the motor was not damaged by this treatment and it looks OK. I can supply photos on request.
Read moreSKU: 2270613
Ordered new motor
New motor came within 3 days of ordering thanks for the perfect product and service
Read more