We never sell your data to third parties
Marathon Y996A Globetrotter series 10 HP, 1800 RPM three-phase general purpose motor with a 215TC NEMA frame and Totally Enclosed Fan Cooled enclosure. Operates on 230/460V at 60 Hz with a 1.15 service factor. C-face mounting configuration for continuous industrial duty.
MODEL 215THFBD7726
Contact supplier for technical support on: 715-675-8090
$2,549.80 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Ambient temperature (°C)
40
Assembly/box mounting
F3
CE
Y
Country of Origin
Mexico
CSA
Y
Current
26.6/13.3 A
Design code
INV
Drive end bearing
Ball
Drive end bearing size
6307
Duty
Continuous
Efficiency
91 %
Electrical type
Squirrel Cage Inverter Duty
Enclosure
Totally enclosed fan cooled
Frame
215TC
Frame Material
Rolled steel
Frequency
60 Hz
Insulation class
H
Inverter Load
1
IP code
43
KVA code
M
Motor orientation
Horizontal
Mounting
Rigid base
Number of speeds
1
Opp drive end bearing
Ball
Opp drive end bearing size
6206
Output HP
10 Hp
Output KW
7.5 kW
Packaged height
14.00 IN
Packaged length
22.19 IN
Packaged width
16.50 IN
Phase
3
Poles
4
Power factor
76.5
Resistance main
.76 Ohms
Rotation
Reversible
Service factor
1.00
Shaft diameter
1.375 in
Shaft type
T
Speed
1770 rpm
Starting method
Inverter Only
Thermal protection
No protection
UL
Recognized
Voltage
230/460 V
- IP-43 rolled steel, MaxGuard inverter rated insulation system exceeds NEMA MG1 Part 31. No lead lengths restrictions on 460V systems or less (as noted)
- Designed for direct replacement of PMDC or any other variable speed application, Top mounted conduit box as found on PMDC motors- F3 conduit box position
- Eliminates brush and commutator maintenance
- 20:1 Constant torque operation from 0 to base speed on vector drive
- Constant Horsepower operation up to 2 times base RPM
- MAX GUARD Class H insulation with CR200 corona resistant magnet wire
- Removable base for C-Face footless mounting, Double-shielded ball bearings
- 40°C Ambient 1.0SF inverter power
- UL Recognized, CSA Certified, and CE Mark
SKU: 2303511
Marathon y543 shipping
The purchase from MRO went smoothly, and it arrived. However, the shipping department needs some remedial training. The box containing the motor was not strapped to the pallet, just set on top of it. As a result, the box rolled off the pallet and was split open. The freight company managed to wrap it up (upside down) with stretch film and put it back on the pallet, but it looked terrible. By a stroke of good fortune the motor was not damaged by this treatment and it looks OK. I can supply photos on request.
Read moreSKU: 2303511
Marathon y543 shipping
The purchase from MRO went smoothly, and it arrived. However, the shipping department needs some remedial training. The box containing the motor was not strapped to the pallet, just set on top of it. As a result, the box rolled off the pallet and was split open. The freight company managed to wrap it up (upside down) with stretch film and put it back on the pallet, but it looked terrible. By a stroke of good fortune the motor was not damaged by this treatment and it looks OK. I can supply photos on request.
Read more