We never sell your data to third parties
Marathon W583A Globetrotter series 50 HP, 900 RPM three-phase general purpose motor with NEMA 404T frame and Totally Enclosed Fan Cooled enclosure. Operates on 460V at 60 Hz with 1.15 service factor. Designed for continuous industrial duty applications.
MODEL 404THFCD9101
Contact supplier for technical support on: 715-675-8090
$15,567.81 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Ambient temperature (°C)
40
Assembly/box mounting
F1/F2 CAPABLE
CE
Y
Country of Origin
Mexico
CSA
Y
Current
62.0 A
Design code
B
Drive end bearing
Ball
Drive end bearing size
6316
Duty
Continuous
Efficiency
92.4 %
Electrical type
Squirrel Cage Inverter Rated
Enclosure
Totally enclosed fan cooled
Frame
404T
Frame Material
Cast iron
Frequency
60 Hz
Hazardous Location
DIVISION 2 T2B
Insulation class
H
Inverter Load
1
IP code
56
KVA code
F
Motor orientation
Horizontal
Mounting
Rigid base
Number of speeds
1
Opp drive end bearing
Ball
Opp drive end bearing size
6314
Output HP
50 Hp
Output KW
37.0 kW
Packaged height
35.0 IN
Packaged length
50.0 IN
Packaged width
42.0 IN
Phase
3
Poles
8
Power factor
80.8
Resistance main
.1493 Ohms
Rotation
Reversible
Service factor
1.15
Shaft diameter
2.875 in
Shaft type
T
Speed
888 rpm
Starting method
Line Or Inverter
Thermal protection
No protection
UL
Listed
Voltage
460 V
- Meets IEEE-841 standard for severe duty motor applications; Meets General Motors GM 7E-TA automotive duty specification and Meets IEEE45 USCG marine duty, API RPI4F for offshore platforms
- IP-56 cast iron, Meets or exceeds NEMA Premium efficiencies, NEMA Premium models are in compliance with EISA2007; Actual test and vibration data supplied with each motor
- MAX GUARD Class F Insulation System, Inverter duty 10:1 variable torque and 10:1 constant torque & 1.15 service factor on Sine Wave Power 1.0 SF on Inverter Power
- F1/F2 capable, Precision balanced to .08”/sec, Steel conduit box
- Inpro/Seal VBX bearing isolators on drive end shaft extension TENV and on both ends of TEFC
- NOTE: BCP (-P) models are not Hazardous Duty motors certified for Division 2 locations, and Hazardous Duty motors meet division 2 CSA certification when BCP is not employed, nameplate Division 2 / zone 2 class I (gases), groups A, B, C, D Meets temperature code T2B
- 40°C Ambient 1.15SF Sine Wave Power and 1.0SF inverter power;
- Provisions to add stub shaft for an encoder (182-449T, TEFC only, Modifications and Kits are available
- UL Recognized & CSA certified and CE Mark
SKU: 2303511
Marathon y543 shipping
The purchase from MRO went smoothly, and it arrived. However, the shipping department needs some remedial training. The box containing the motor was not strapped to the pallet, just set on top of it. As a result, the box rolled off the pallet and was split open. The freight company managed to wrap it up (upside down) with stretch film and put it back on the pallet, but it looked terrible. By a stroke of good fortune the motor was not damaged by this treatment and it looks OK. I can supply photos on request.
Read moreSKU: 2267999
1/2 hp. motor
Purchased the motor easily and received it quick and well packaged. The entire purchase went very well.
Read more
| Brand | Gates Rubber |
| Model | AT5-75-30M-LLUSHBNTB |
SKU: 2303511
Marathon y543 shipping
The purchase from MRO went smoothly, and it arrived. However, the shipping department needs some remedial training. The box containing the motor was not strapped to the pallet, just set on top of it. As a result, the box rolled off the pallet and was split open. The freight company managed to wrap it up (upside down) with stretch film and put it back on the pallet, but it looked terrible. By a stroke of good fortune the motor was not damaged by this treatment and it looks OK. I can supply photos on request.
Read moreSKU: 2267999
1/2 hp. motor
Purchased the motor easily and received it quick and well packaged. The entire purchase went very well.
Read more