We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Hubbell Wiring HBL3100PS1W PS INS PLUG 2P3W 100A 600V S1
MODEL HBL3100PS1W
Contact supplier for technical support on: jruvalcaba@hubbell.c
$593.33 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Amperage
100A
Voltage
250V DC/600V AC
Watertight Insulgrip Plug, 2P3W, 100A 600V, Series 1
Specifications
| Product Type | |
|---|---|
| Service Style | Standard |
| Insulgrip Grounding Style | Style I |
| Device | Plug |
| Amperage | 100A |
| Voltage | 250V DC/600V AC |
| Poles and Wires | 2 Pole, 3 Wire |
| Terminal Accommodations | #4 To #2 AWG copper wire only |
| Cord clamp range | .925" To 1.500" |
| Replacement Interior Number | IN3100MS1 |
| Housing | Valox 357 |
| Shroud | Aluminum |
| Lock Ring | Epoxy Painted Aluminum |
| Mounting Screws | Stainless Steel (300 Series) |
| Contact Carrier | Thermoset Polyester |
| Retainer | Thermoset Polyester |
| Terminal Screws | Heat treated and Zinc Plated Steel |
| Assembly Screws | Stainless Steel (300 series) |
| Gaskets | Neoprene |
| Cord Clamps | Rynite SST35 |
| Grommet/Glands | Neoprene |
| Gland Cap | Rynite SST35 |
| Cord Clamp Screws | Stainless Steel (300 Series) |
| Clamp Nut | Nickel Plated Brass |
| Ground/Phase Sleeve | Brass |
| Ground Standoff | Brass |
| Ground Bracket | Nickel Plated Spring Bronze |
| Certification | UL Listed, UL Standard 1682, UL50 and UL1010 (plugs only), CSA Certified to CSA C22.2 No.182.1, No.94 and No.159 (plugs only), UL Listed and CSA Certified Type 4X. |
| Dielectric Withstand Voltage | Withstands 3, 000V AC Min. |
| Max Working Voltage | 600V AC RMS (i. e., minimum creepage and clearance distance of 6.4 mm, per UL 1682). |
| Current Interrupting | Certified for current interruption at full pated current. |
| Temperature Rise | Max 30° C temperature rise at full rated current after 50 cycles of overload at 150% of rated current. |
| Endurance | Up to 1, 000 connect and disconnect cycles at full rated current and voltage. |
| Impact Resistance | Per CSA C22.2 N0.182.1 / UL1682 |
| Cord Grip Retention | Per CSA C22.2 N0.182.1 / UL1682 |
| Cord Accommodation | Round portable service cords of diameters commensurate with the device rating as defined in UL Standard 62, CSA C22.2 No.49 and the harmonized European Standards. |
| Terminal Identification | Terminals identified in accordance with UL1686 (1, 2, 3, Green). |
| Product Identification | Identification and ratings are a permanent part of the device housing. |
| Moisture Resistance | Type 3, 4, 4X per UL 50 and CSA C22.2, No.94. |
| Flammability | UL 94V-0 and CSA C22.2 No.0.17 |
| Operating Temperatures | Maximum Continuous: 75° C; Minimum Continuous: -40° C w/o impact, -25° with impact. |
| Hazardous Locations | Plugs Only- Class I, Division I & II, Groups B & C & D and Class II Division I & II, Groups F & G per UL 1010 & CSA 22.2, No.459. |
| Certifications | UL Listed, UL Standard 1682, UL 50, and UL 1010 (plugs only) CSA Certified to CSA Spec. C22.2 No.182.1, No.94 and No.159 (plugs only) UL Listed, CSA Certified Type 4X. |
| Device Description | The interchangeable product line, INSULGRIP pin and sleeve features metallic where you want it and non-metallic where you need it offers two different styles of grounding. |
| UPC Number | 78358501090 |
SKU: 5017805
Helpful and good service
Even when I mistakenly ordered the incorrect product, they quickly organised the RMA and paperwork so I could ship right back. Found them very helpful
Read moreSKU: 5020985
Hubble floor socket
Nice low profile. Access door is tight...needs a small tool to open. Installation was easy
Read moreSKU: 1019832
The right stuff
Worry free order. Came fast and exactly as described. Will use MRO again.
Read moreSKU: 5018609
Thank you for carrying hubble and wiremold
With Hubble I am able to meet UL a smaller conduit for four #6 THHN wires than if I used Wiremold. The Hubble version is hard to obtain because Wiremold dominates this sector.
Read more
#1021947
Brand
Hubbell Wiring
Model
HBL3100RS1WR
#1021928
Brand
Hubbell Wiring
Model
HBL3100PS1W
#1030068
Brand
Hubbell Wiring
Model
IN3100MS1
#1021911
Brand
Hubbell Wiring
Model
HBL3100CS1WR
| Brand | StrongHold |
| Model | ST-15420 |
| Brand | Hubbell Wiring |
| Model | HBL20GBA618IV |
| Brand | System Plast |
| Model | 12534 |
| Brand | Hubbell Wiring |
| Model | SFRCYROW |
| Brand | Timken |
| Model | T611-902A1 |
| Brand | WEG |
| Model | SSW06-KECA-950 |
| Brand | Gates Rubber |
| Model | D140 |
SKU: 5017805
Helpful and good service
Even when I mistakenly ordered the incorrect product, they quickly organised the RMA and paperwork so I could ship right back. Found them very helpful
Read moreSKU: 5020985
Hubble floor socket
Nice low profile. Access door is tight...needs a small tool to open. Installation was easy
Read moreSKU: 1019832
The right stuff
Worry free order. Came fast and exactly as described. Will use MRO again.
Read moreSKU: 5018609
Thank you for carrying hubble and wiremold
With Hubble I am able to meet UL a smaller conduit for four #6 THHN wires than if I used Wiremold. The Hubble version is hard to obtain because Wiremold dominates this sector.
Read moreItem must be unused.
Item must be in it's original package.
Restocking, shipping and handling fees may apply to any return with this manufacturer.
For more information please consult https://www.mrosupply.com/page/returnwarranty-policy/