We never sell your data to third parties
Hubbell Wiring HBL4100CS1WR PS INS CONN 3P4W 100A 600V S1 REV
MODEL HBL4100CS1WR
Contact supplier for technical support on: jruvalcaba@hubbell.c
$774.67 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
#1022518
Brand
Hubbell Wiring
Model
HBL4100RS1WR
#1022492
Brand
Hubbell Wiring
Model
HBL4100PS1W
#1022440
Brand
Hubbell Wiring
Model
HBL4100CS1WR
#1030138
Brand
Hubbell Wiring
Model
IN4100MS1
Amperage
100A
Voltage
250V DC/600V AC
Watertight Insulgrip Connector, 3P4W, 100A 600V, Series 1
Specifications
| Product Type | |
|---|---|
| Service Style | Standard |
| Insulgrip Grounding Style | Style I |
| Device | Connector |
| Amperage | 100A |
| Voltage | 250V DC/600V AC |
| Poles and Wires | 3 Pole, 4 Wire |
| Terminal Accommodations | #4 To #2 AWG copper wire only |
| Cord clamp range | 1.100" To 1.650" |
| Replacement Interior Number | IN4100FS1 |
| Housing | Valox 357 |
| Shroud | Epoxy Painted Aluminum |
| Contact Carrier | Thermoset Polyester |
| Retainer | Thermoset Polyester |
| Ground/Phase Pins | Brass |
| Terminal Screws | Heat treated and Zinc Plated Steel |
| Gaskets | Neoprene |
| Cord Clamps | Rynite SST35 |
| Grommet/Glands | Neoprene |
| Gland Cap | Rynite SST35 |
| Cord Clamp Screws | Stainless Steel (300 Series) |
| Clamp Nut | Nickel Plated Brass |
| Cover | Epoxy Painted Aluminum |
| Cover Screw/Rivet | Aluminum |
| Pin/Sleeve Spring | Beryllium Copper |
| Ground Standoff | Brass |
| Ground Bracket | Nickel Plated Spring Bronze |
| Spring Guide | Stainless Steel (300 series) |
| Springs, Arm and Wave | Stainless Steel (300 series) |
| Spring Washer | Stainless Steel (300 series) |
| Hinge Bushing | Aluminum |
| Certification | UL Listed, UL Standard 1682, UL50 and UL1010 (plugs only), CSA Certified to CSA C22.2 No.182.1, No.94 and No.159 (plugs only), UL Listed and CSA Certified Type 4X. |
| Dielectric Withstand Voltage | Withstands 3, 000V AC Min. |
| Max Working Voltage | 600V AC RMS (i. e., minimum creepage and clearance distance of 6.4 mm, per UL 1682). |
| Current Interrupting | Certified for current interrupting at full rated current. |
| Temperature Rise | Max 30° C temperature rise at full rated current after 50 cycles of overload at 150% of rated current. |
| Endurance | Up to 1, 000 connect and disconnect cycles at full rated current and voltage. |
| Impact Resistance | Per CSA C22.2 N0.182.1 / UL1682 |
| Cord Grip Retention | Per CSA C22.2 N0.182.1 / UL1682 |
| Cord Accommodation | Round portable service cords of diameters commensurate with the device rating as defined in UL Standard 62, CSA C22.2 No.49 and the harmonized European Standards. |
| Terminal Identification | Terminals identified in accordance with UL1686 (1, 2, 3, Green). |
| Product Identification | Identification and ratings are a permanent part of the device housing. |
| Moisture Resistance | Type 3, 4, 4X per UL 50 and CSA C22.2, No.94. |
| Flammability | UL 94V-0 and CSA C22.2 No.0.17 |
| Operating Temperatures | Maximum Continuous: 75° C; Minimum Continuous: -40° C w/o impact, -25° with impact. |
| Certifications | UL Listed, UL Standard 1682, UL 50, and UL 1010 (plugs only) CSA Certified to CSA Spec. C22.2 No.182.1, No.94 and No.159 (plugs only) UL Listed, CSA Certified Type 4X. |
| Device Description | The interchangeable product line, INSULGRIP pin and sleeve features metallic where you want it and non-metallic where you need it offers two different styles of grounding. |
| UPC Number | 78358501104 |
Thank you for carrying hubble and wiremold
Verified · SKU 5018609With Hubble I am able to meet UL a smaller conduit for four #6 THHN wires than if I used Wiremold. The Hubble version is hard to obtain because Wiremold dominates this sector. Read more
Rj600
Verified · SKU 1100510.Right box for my project . Got it delivered very quick. Read more
Hubble floor socket
Verified · SKU 5020985Nice low profile. Access door is tight...needs a small tool to open. Installation was easy Read more
The right stuff
Verified · SKU 1019832Worry free order. Came fast and exactly as described. Will use MRO again. Read more
Item must be unused.
Item must be in it's original package.
Restocking, shipping and handling fees may apply to any return with this manufacturer.
For more information please consult https://www.mrosupply.com/page/returnwarranty-policy/