We never sell your data to third parties
Call for Pricing - 888-671-2883
Typically Ships in: 1 day
Returnable: Yes
Cable cross-section
0.75 ... 10 mm²
Cable entry position
Up/Down
Cable outlets per side
2xM32 / 2xM32+M16
Connecting capacity main circuit
Screw Clamp 0.75 ... 10 mm²Screw Clamp / PE Terminal 1pc,0.75 ... 10 mm²
Conventional free-air thermal current
40 A
Conventional thermal current
Fully Enclosed 40 A
Degree of protection
acc. to IEC 60529 IP65
Enclosure material
Plastic
Handle color
Grey
Handle Type
Side-operated handle
Impact resistance rating
Housing IK08
Maximum mounted auxiliary contacts
1 NO, 0 NC
Mounted auxiliary contacts
0 NO, 0 NC
Neutral type
Fixed neutral
Number of auxiliary contacts NC
0
Number of auxiliary contacts NO
0
Rated current (In)
40 A
Rated impulse withstand voltage
8 kV
Rated insulation voltage
acc. to IEC/EN 60664-1 690 V
Rated operational current AC-22A
(230 V) Single Phase 40 A
Rated operational current AC-23A
(230 V) 32 A
Rated operational power AC-23A
(230 V) Single Phase 7.5 kW
Rated operational voltage
Main Circuit 690 V
Tightening torque
Main Circuit 1.2 N·m
Encl. Switch Disconnector, 2-p. 415V AC23 40A, 7.5kW. Plastic enclosure. IP65. Grey Side-operated handle. Interlocked cover. The enclosure of the ABB´s side controlled enclosed switches is made of rigid polycarbonate. The enclosure is UV protected, and protected against low pressure water jets (IP65), and hence built for outdoor and indoor use. The enclosure is available in different colors, grey, yellow and white. The cable entries are threaded and have knock out holes for 2 parallell cables, both from top and bottom. Membrane grommets are included (IP54). The handle is padlockable and made for one padlock. The cover is interlocked. The switch is made for 5 wire system, and have a fixed neutral terminal and PE terminal. The terminals are easily accessible for easy installation.
