Image for Illustration purposes only. Actual product may vary

Dixon BU24 Boss® clamp with 4-bolt design and 2 gripping fingers for 1-1/2" hose ID. Zinc plated iron construction provides corrosion resistance and durability in industrial hose connection applications.

Name: Dixon BU24 Boss® clamp with 4-bolt design and 2 gripping fingers for 1-1/2" hose ID. Zinc plated iron construction provides corrosion resistance and d
Brand: Dixon
Price: 35.15 USD
Availability: InStock
Rating: 4.75 (4 reviews)

MODEL BU24

BRAND

Dixon

SKU

108294

WEIGHT

2.340 lb

UOM

each

This vendor has a minimum order quantity of 2. Order minimum ($) may be applied. Add desired QTY to cart and proceed to checkout to view minimum

Contact supplier for technical support on: 8779634966

$35.15 Each

Prices are subject to change

FREE SHIPPING ON ORDERS OVER $100

Select Quantity

GET A QUOTE

Brand Minimum Order Quantity: 2

Typically Ships in: 1 day

Returnable: See conditions

Hose I.D.

1 1/2 in

Hose I.D. (in)

1-1/2 (40 mm)

Hose OD From

2-12/64 in (55.6 mm)

Hose OD To

2-24/64 in (60.3 mm)

Material

Zinc plated iron

Torque

40 ft. lbs.

Features

4-bolt type clamp with 2 gripping fingers and 2 clamp sections

Instructions

4 Bolt Dixon Boss Clamp Bolt Tightening Sequence, Using a torque wrench, begin tightening the bolts as follows:
A) Back bolt (bolt with nut facing assembler that is furthest away from gripping finger) 1 full turn.
B) Front bolt (bolt with nut facing assembler that is closest to gripping finger) 1 full turn.
C) Snug by hand (if bolts are loose) nuts on opposite side of bolts just torqued.
D) Opposite side back bolt (bolt with nut facing assembler furthest away from gripping finger) 1 full turn.
E) Opposite side front bolt (bolt with nut facing assembler closest to gripping finger) 1 full turn.
F) Snug by hand (if bolts are loose) nuts on opposite side of bolts just torqued.
G) Repeat above procedure "a" through "f" until all of the bolts have reached the recommended torque.
H) Remove assembly from vise.

Safety Notes

Torque values for clamps are based on dry bolts. The use of lubricant on bolts will adversely effect clamp performance. Do not lubricate nuts and bolts. Recommended torque rating in ft. lbs.
Worn-out hose couplings can be dangerous. They should be checked regularly and replace when necessary. Each coupling user should review applications and add safety devices where indicated.
Note. Pressurized steam is an extremely dangerous commodity. Only hose, fittings, clamps and accessory items that have been approved for steam service should ever be used! Never use an unapproved item for steam service. Always follow the manufacturer's product recommendations for pressurized steam handling.

Specifications

Recommended for steam service up to 450°F (232°C).

Use

Bolts in Boss Clamps are designed to bend as they are tightened. This allows the clamp to conform to the hose outside diameter.
Always tighten bolts to their specified torque value.
Periodic re-tightening of bolts is required due to "cold flow" phenomenon present in all rubber hoses.
Boss Clamps are for single use only! Once removed they are to be discarded.