We never sell your data to third parties
Power Team 9595 is a 4-way air valve designed for remote mount applications. This hydraulic component provides reliable directional control for pneumatic systems. Constructed for durability in industrial environments.
MODEL 9595
Contact supplier for technical support on: 800 477 8326
$1,918.54 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Body Material
Steel
Flow Rate
25 cu-ft/min
Height
4 in
Length
4-1/2 in
Media
Oil
Number of Ports/Ways
3/4-Way
Port Size
1/4 in Male
Pressure Rating
10000 psi
Width (in)
2-1/2
Single or double-acting cylinders; air operated minimum of 50psi air pressure required
Application: Single or double-acting cylinders; air operated (minimum of 50 psi air pressure required.) Actuation: 9595 is air operated. Operation with single-acting cylinder: Either oil port "A" or "B" must be plugged on valve. With port "B" plugged, solenoid is energized to position "A, " oil port "A" becomes pressurized. When solenoid is energized to position "B, " oil port "A" becomes the return port. Operation with multiple single-acting cylinders: a pressure line from one bank can be connected to oil port "A" and the other to oil port "B" on the valve. Sequence: When energized to position "A, " oil port "A" becomes pressurized and clamps the fixture connected to oil port "A"; oil port "B" becomes a "return" port for cylinder connected to oil port "B, " and retracts it. The opposite happens when solenoid "B" is energized. Operation with double-acting cylinder: Port "A" is connected to "advance" port of cylinder, oil port "B" connects to cylinder "return" port. solenoid is energized to position "A, " oil port "A" becomes pressurized to extend cylinder piston. The opposite happens when solenoid "B" is energized. Valve does not hold in "retract" position. Note: When using more than one valve on a pump, the tank port may require a check valve to permit inadvertent, momentary extension of a retracted cylinder. Note: If pump is equipped with an internal outlet check, a "hold" position can be maintained with the pump shut off. Note: Valves are shipped without control switch. For valves 9524, 9554 and 9593, use Remote Hand Control (No. 304718). For valve 9595, use Remote Hand Control (No. 209593). Note: Valves have 1/4" NPTF ports. 3/8" to "1/4" adapters are included. Note: Maximum tank line pressure for remote mounted valves is 500 psi. Note: Valves are shipped without control switch. Use Remote Hand Control (No. 202777). caution: To prevent sudden, uncontrolled descent of a load as it is being lowered, use a Load Lowering Valve (No. 9596) or Counter Balance Valve (No. 9720) in conjunction with the directional valve used in your application.
Specifications
| Order No. | 9595 |
|---|---|
| Cylinder Application * | S. A. & D. A. |
| Operation | Air |
| Valve Type | 3/4-way, 2 Pos. |
| Volt | — |
| Advance / Return | No |
| Advance / Hold Return | Yes |
| posi-check Feature | No |
| posi-check Feature | 11. 4 |
SKU: 1966869
Mro product supply
Thanks MROSUPPLY, fair prices and good stock, fast shipping and communication. Always the first stop for tooling and supplies.
Read more
| Brand | Donghua Chain |
| Model | 35-2 |
| Brand | Palmgren |
| Model | 9680159 |
| Brand | PT Coupling |
| Model | 6026000381 |
SKU: 1966869
Mro product supply
Thanks MROSUPPLY, fair prices and good stock, fast shipping and communication. Always the first stop for tooling and supplies.
Read moreDisclaimer: The return policy information shown below is merely a copy of the text as stated in IDC-USA's Annual Return Policy.
File: http://documents.mrosupply.com/file_uploads/IDCreturnpolicy.pdf
ANNUAL RETURN POLICY PURPOSE: The purpose of IDC-USA’s Annual Return Policy is to allow IDC Distributors the opportunity to return salable stock merchandise of current design that may not have adequate “turns” and replace it with faster moving product.
ACCEPTANCE: IDC Owner-Distributors shall submit a return list to IDC-USA with all pertinent information as follows:
a. Product brand name
b. Quantity
c. IDC-USA’s product identification number
d. Corresponding distributor’s P.O. number or invoice number Acceptance of return shall be subject to IDC-USA inventory levels and manufacturer’s restrictions.
AUTHORIZATION: The return shall be audited and the IDC Owner-Distributor will receive an approved return list with a Return Material Authorization (RMA) number assigned to it. RETURN DATE: Each owner-distributor shall be assigned a month during which they shall be entitled to make a single annual return.
Product Qualification: All products returned must be:
a. On the current price list
b. In good resale condition
c. In the original packaging
d. Purchased from IDC-USA within 3 years of the return
e. Stock items only; no special order items
f. Only those items which have been approved
VALUE: The IDC Owner-Distributor shall receive a credit not to exceed 5% of the owner-distributor’s prior year annual purchases from the IDC Distribution Center. Credit received shall be the actual purchase price or price in effect at the time of the return, whichever is lowest, less applicable restocking charges. Additionally, all annual returns must have a minimum return value of $100.
RESTOCKING CHARGES: There will be a 15% restocking fee unless return is offset by a noncancelable order of equal value to be placed at the time of return. All items received that are not in their original box shall be subject to an additional 15% repackaging fee.
FREIGHT: Returns will be made freight prepaid by the IDC Owner-Distributor to the IDC Distribution Center. The packing slip and all cartons must reference the RMA number. The owner-distributor will be notified of any items received that do not qualify as set forth above. Those items will not be credited and shall be scrapped unless the IDC Owner-Distributor directs otherwise and assumes any additional transportation charges.