We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
HS3000 SPREADER-1-1/2 TON HYDRAU
MODEL HS3000
Contact supplier for technical support on: 800 477 8326
$1,347.67 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Bare Tool/Kit
Bare Tool
Height
4-1/4 in
Length
20-1/8 in
Material
Ductile Iron
Spreading Distance
11-1/2 in
Spreading Force
1.5 ton
Type
Hydraulic
Width (in)
5-1/8 in
Hydraulic Pry Bar is used to lift machines or as a clamp; spread concrete forms or rebar, or to perform straightening jobs.
- Use to lift machines or as a clamp; spread concrete forms or rebar or preform straightening jobs.
- Conforms to asme B30. 1 standard.
- High strength alloy steel forged upper and lower jaws on HS2000. Jaws are spring return; retract automatically when pressure is released.
No. HS2000- 1ton capacity spreader. Full 2, 000 lbs. capacity at 10, 000 psi with 4" spread. Can be "dead-ended" at 4" spread under full load. Needs only 9/16" clearance to engage jaws.
No. HS3000- 1 1/2 ton capacity spreader. Full 3, 000 lb. capacity at 10, 000 psi with 11 1/2 spread. Greater than competitive units. Needs only 1 1/4" clearance to engage jaws. Can be "dead-ended" at 11 1/2" spread at full load.
Tested to conform to asme B30. 1 standard
Specifications
- HS3000
- 1 1/2
- 11 1/2''
- 3. 50
- 1 1/4''
- 22. 0
SKU: 1966869
Mro product supply
Thanks MROSUPPLY, fair prices and good stock, fast shipping and communication. Always the first stop for tooling and supplies.
Read more
| Brand | WEG |
| Model | UMBW-4C1-6 |
| Brand | MasterDrive |
| Model | 5/8VK2240 |
| Brand | RAB Lighting |
| Model | A21-23-E26-840-DIM |
| Brand | RAB Lighting |
| Model | T8-10.5-48G-850-DIR |
| Brand | FK Bearing |
| Model | SCML5MT |
| Brand | FK Bearing |
| Model | 2508L |
| Brand | Kipp |
| Model | K0160.0125XCP |
| Brand | FK Bearing |
| Model | JFXL6 |
SKU: 1966869
Mro product supply
Thanks MROSUPPLY, fair prices and good stock, fast shipping and communication. Always the first stop for tooling and supplies.
Read moreDisclaimer: The return policy information shown below is merely a copy of the text as stated in IDC-USA's Annual Return Policy.
File: http://documents.mrosupply.com/file_uploads/IDCreturnpolicy.pdf
ANNUAL RETURN POLICY PURPOSE: The purpose of IDC-USA’s Annual Return Policy is to allow IDC Distributors the opportunity to return salable stock merchandise of current design that may not have adequate “turns” and replace it with faster moving product.
ACCEPTANCE: IDC Owner-Distributors shall submit a return list to IDC-USA with all pertinent information as follows:
a. Product brand name
b. Quantity
c. IDC-USA’s product identification number
d. Corresponding distributor’s P.O. number or invoice number Acceptance of return shall be subject to IDC-USA inventory levels and manufacturer’s restrictions.
AUTHORIZATION: The return shall be audited and the IDC Owner-Distributor will receive an approved return list with a Return Material Authorization (RMA) number assigned to it. RETURN DATE: Each owner-distributor shall be assigned a month during which they shall be entitled to make a single annual return.
Product Qualification: All products returned must be:
a. On the current price list
b. In good resale condition
c. In the original packaging
d. Purchased from IDC-USA within 3 years of the return
e. Stock items only; no special order items
f. Only those items which have been approved
VALUE: The IDC Owner-Distributor shall receive a credit not to exceed 5% of the owner-distributor’s prior year annual purchases from the IDC Distribution Center. Credit received shall be the actual purchase price or price in effect at the time of the return, whichever is lowest, less applicable restocking charges. Additionally, all annual returns must have a minimum return value of $100.
RESTOCKING CHARGES: There will be a 15% restocking fee unless return is offset by a noncancelable order of equal value to be placed at the time of return. All items received that are not in their original box shall be subject to an additional 15% repackaging fee.
FREIGHT: Returns will be made freight prepaid by the IDC Owner-Distributor to the IDC Distribution Center. The packing slip and all cartons must reference the RMA number. The owner-distributor will be notified of any items received that do not qualify as set forth above. Those items will not be credited and shall be scrapped unless the IDC Owner-Distributor directs otherwise and assumes any additional transportation charges.