We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Taylor Pneumatic T-7734L 1/2" Impact Wrench 2" Extended Anvil 325 lb-ft Max Torque 1/2" Impact Wrench 2" Extended Anvil 325 lb-ft Max Torque
MODEL T-7734L
Contact supplier for technical support on: 800-805-8665
$151.46 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: Yes
Air Cons at Load
15
Air Inlet
1/4" NPT
Air Inlet NPT (in)
1/4
Average Air Cons
4
Length (in)
8.125
Max Air Pressure (psi)
90
Max Torque (lb-ft)
325
Rated Torque
275
Sq Drive (in)
1/2
Torque (lb-ft)
275
Weight (lb)
5.25
Specifications
| T-7734 | T-7734L | |
|---|---|---|
| Bolt Capacity | 5/8" | 5/8" |
| Square Drive | 1/2" | 1/2" |
| Max. Torque | 325 ft. lbs. | 325 ft. lbs. |
| RPM | 8, 000 | 8, 000 |
| Length | 6 3/4" | 8 1/8" |
| Weight | 5 lbs. | 5.25 lbs. |
| Air Inlet | 1/4" NPT | 1/4" NPT |
| Air Pressure | 90 PSI Max. | 90 PSI Max. |
- Built-in regulator
- Ring type socket retainer
- Single handed forward/reverse
- 325 ft. lbs. of torque
- Swinging weight clutch
Lightweight and compact, the T-7734 is idle for general duty automotive applications. T-7734L extended anvil for those hard to reach fasteners.
SKU: 2306820
T-7781 palm hammer
I purchased the Taylor T-7781 Palm Hammer and received it in a timely manner and without damage. The packaging was robust and secure and included a nice catalog of the many other tools available. The palm hammer is made in Taiwan and appears to be well-made and of good quality. It came with the rubber pad installed which I swapped out for the hardened steel pad since I am using it for doing some panel beating in my project car. I have not used it extensively but so far it has performed very well with no hiccups. I also appreciated the website - very professional and simple to use plus I could track delivery. Based on my experience so far, I would definitely recommend this supplier for future tool purchases.
Read more
| Brand | MROSupply Fasteners |
| Model | FSTPCK-494284 |
| Brand | Koyo Bearing |
| Model | NTA-2435;PBL125 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-876186 |
| Brand | Consolidated Bearings |
| Model | 52 X 80 X 10 MM |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-581707 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-221103 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-011001 |
| Brand | Consolidated Bearings |
| Model | AHX-3030 X 145 MM |
SKU: 2306820
T-7781 palm hammer
I purchased the Taylor T-7781 Palm Hammer and received it in a timely manner and without damage. The packaging was robust and secure and included a nice catalog of the many other tools available. The palm hammer is made in Taiwan and appears to be well-made and of good quality. It came with the rubber pad installed which I swapped out for the hardened steel pad since I am using it for doing some panel beating in my project car. I have not used it extensively but so far it has performed very well with no hiccups. I also appreciated the website - very professional and simple to use plus I could track delivery. Based on my experience so far, I would definitely recommend this supplier for future tool purchases.
Read more