We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dixon 2780406CBC Female NPSM Swivel x Push-on Hose Barb Ball Seat
MODEL 2780406CBC
This product has a minimum order quantity of (50 minimum) This is the minimum order quantity available when purchasing this product.
Contact supplier for technical support on: 8779634966
$15.15 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity(50 minimum)
Typically Ships in: 1 day
Returnable: See conditions
California Prop 65 warningFemale Thread
NPSM
Female Thread Size
3/8 in-18
Hex
11/16 in
Hose I.D.
1/4 in
Length
1.40 in
Material
Brass
Pressure rating (psi)
350
Temperature range
-40F to 150F (-40C to 65.6C)
Construction
Ball seat type
Installation
- Assembly Instructions:
- 1. Trim hose end with smooth square cut.
- 2. Lubricate either push-on fitting, hose or both.
- 3. Insert push-on fitting into hose until first barb is in hose.
- 4. Place end of fitting against a flat object (bench, wall, etc.) and grip the hose one inch from end. Push with a steady force until end of hose is covered by yellow plastic cap.
Instructions
- Disassembly instructions:
- 1. Leaving push-on fitting in place, make a 1" cut in the hose along the barbed end of the fitting. Note: Be careful not to nick barbs when cutting the hose.
- 2. With firm grip on hose, give a sharp downward pull to release the fitting from the hose.
Note
No hose clamps or ferrules are needed
Safety Notes
- Dixon push-on fittings are intended for use with Lok-On (push-on style) hose only.
- Caution: Push-on fittings will properly grip push-on hose only when pushed all the way in, with the cut end of the hose completely concealed by the plastic cap.
Specifications
| Number of Barbs | 2 |
|---|---|
| Barb Length | .77" |
#2932685
Brand
Dixon
Model
2780404C
#2932684
Brand
Dixon
Model
2780402CBC
#2932693
Brand
Dixon
Model
2780608C
#2932683
Brand
Dixon
Model
2780402C
#2932695
Brand
Dixon
Model
2780808CBC
