Image for Illustration purposes only. Actual product may vary
Dixon
2900407C Male SAE Inverted Flare Swivel x Push-on Hose Barb
Dixon 2900407C Male SAE Inverted Flare Swivel x Push-on Hose BarbMODEL 2900407C
This product has a minimum order quantity of (100 minimum) This is the minimum order quantity available when purchasing this product.
Contact supplier for technical support on: 8779634966
$6.31 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity(100 minimum)
Orders over $500 qualify for a Free Gift
Typically Ships in: 1 day
Returnable: See conditions
California Prop 65 warningHex
7/16 in
Hose I.D.
1/4 in
Length
1.52 in
Male Thread
UNF
Male Thread Size
7/16 in-24
Material
Brass
Pressure rating (psi)
350
Temperature range
-40F to 150F (-40C to 65.6C)
Tube O.D.
1/4 in
Installation
- Assembly Instructions:
- 1. Trim hose end with smooth square cut.
- 2. Lubricate either push-on fitting, hose or both.
- 3. Insert push-on fitting into hose until first barb is in hose.
- 4. Place end of fitting against a flat object (bench, wall, etc.) and grip the hose one inch from end. Push with a steady force until end of hose is covered by yellow plastic cap.
Instructions
- Disassembly instructions:
- 1. Leaving push-on fitting in place, make a 1" cut in the hose along the barbed end of the fitting. Note: Be careful not to nick barbs when cutting the hose.
- 2. With firm grip on hose, give a sharp downward pull to release the fitting from the hose.
Note
No hose clamps or ferrules are needed
Safety Notes
- Dixon push-on fittings are intended for use with Lok-On (push-on style) hose only.
- Caution: Push-on fittings will properly grip push-on hose only when pushed all the way in, with the cut end of the hose completely concealed by the plastic cap.
Specifications
- Number of Barbs: 2
- Barb Length: .77"
SKU: 6053348
Dixon hose barbs
The products were as advertised and order processing and delivery was fast and efficient.
Read moreSKU: 107691
Solid valve!
I use these valves as the trigger for some flame effects. They snap back quickly and don't wear out or pass center and leak like cheaper versions. Best bang for your buck!
Read moreSKU: 2933866
Dixon 6hf6-b 3/4" iso-b coupler 3/4" nptf bras 200025-6
Great price, fast delivery.
Read moreWhen you get to checkout, you’ll be able to select a free gift! Depending on the cart value, you’ll be shown relevant gifts your order qualifies for.
$500
MRO Hat
MRO Golf Balls
MRO Hi-Vis Vests
MRO Mug
$750
32oz Water Bottle
Throw Blanket
30 piece Hex Set
Telescopic Pick Up
$1,250
Golf Cooler
11-in-1 Screw Driver Set
Gorilla Grip Knee Pad
John Deere Oilskin Hat
$2,500
Igloo 1/2 Gallon Jug
Rechargable Headlamp
Larix Trucker Hat
$5,000
Igloo 10 Gallon Cooler
Igloo Party Bucket Cooler
Klein Tools Speaker
Klein Tools 8-in-1
$7,500
GX-6F Pro Golf Range Finder
Bushnell Outdoorsman Speaker
Jaeger 24px Ratcheting Wrench Set
Aspen Beverage Bucket
SKU: 6053348
Dixon hose barbs
The products were as advertised and order processing and delivery was fast and efficient.
Read moreSKU: 107691
Solid valve!
I use these valves as the trigger for some flame effects. They snap back quickly and don't wear out or pass center and leak like cheaper versions. Best bang for your buck!
Read moreSKU: 2933866
Dixon 6hf6-b 3/4" iso-b coupler 3/4" nptf bras 200025-6
Great price, fast delivery.
Read more