Dixon Valve & Coupling Dixon&Reg; SS337

UPC: | UNSPSC: 40141734 | GTIN:

Pipe, Tube & Hose Fittings > Tube & Hose Fittings > Steam Fittings

Dixon® Ground Joint Washer Seal Stem, Series: Boss™, Stem, 3/8 in Nominal, Hose Shank x NPT, Steel, Plated, 15/16 in Dia x 1-31/32 in L, Domestic

Features:

• The stem part that is clamped to the hose is one part of the boss washer seal connection
• The boss washer seal spud part of the coupling serves as the other half of the connection and is usually fixed to the equipment
• The two halves are connected or disconnected by rotating the wing nut on the spud
• A Leakproof seal forms by rotating the wing nut and hammering it tight
• Use with Boss™ clamps
• A Klingersil C-4401 washer is inserted between the stem and spud
• Recommended for steam service up to 450 deg F
• Worn-out hose couplings can be dangerous
• They should be checked regularly and replace when necessary
• Each coupling user should review applications and add safety devices where indicated
• Note: pressurized steam is an extremely dangerous commodity
• Only hose, fittings, clamps and accessory items that have been approved for steam service should ever be used! never use an unapproved item for steam service
• Always follow the manufacturer's product recommendations for pressurized steam handling
• Warning: this product contains a chemical known to the state of California to cause birth defects or other reproductive harm
• Do not use in connection with drinking water
• Wash hands after handling

Specs:

• Fitting/Connector Type: Stem
• Nominal Size: 3/8 in
• Domestic/Import: Domestic
• End Style: Hose Shank x NPT
• Dimensions: 15/16 in Dia x 1-31/32 in L
• Material: Steel
• Finish: Plated
• Series: Boss™

Packaging:

• Weight: 0.1 lb