We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dixon PND-DQCKIT5 DF-Series Industrial 2-Part Kit is a retail-packaged quick coupling kit designed for industrial hose applications. This kit includes components for reliable connections in pneumatic and fluid transfer systems.
MODEL PND-DQCKIT5
This vendor has a minimum order quantity of 5. Order minimum ($) may be applied. Add desired QTY to cart and proceed to checkout to view minimum
Contact supplier for technical support on: 8779634966
$15.09 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Brand Minimum Order Quantity: 5
Typically Ships in: 1 day
Returnable: See conditions
California Prop 65 warningBody Size
1/4 in
Hex
Coupler - 3/4 in Plug - 11/16 in
Length
Coupler - 2.07 in (Coupler - 52.6 mm, Plug - 42.2 mm) Plug - 1.66 in (Coupler - 52.6 mm, Plug - 42.2 mm)
Material
Coupler - Brass Plug - Steel
Max OD
Coupler - 0.93 in (Coupler - 23.5 mm, Plug - 20.1 mm) Plug - 0.79 in (Coupler - 23.5 mm, Plug - 20.1 mm)
Pressure Rating
See Product Details
Temperature range
-40F to 250F (-40C to 121C)
Thread
NPTF
Compatibility & Interchange Data
- Foster 3, 4, 5 and 6 Series
- Parker 30 - Series Automatic Interchange & Parker 20-Series Manual Interchange
- Hansen 3000, 4000, 5000 and 6000 & Hansen 1000, 400 and 500
Construction
- Machined components are manufactured using solid bar stock.
- Stainless steel balls, retaining rings and springs maximize corrosion resistance and extend service life.
- Nitrile (Nitrile Rubber) seals are standard
- Steel componentry is plated using ROHS Compliant Trivalent Chrome.
- Steel sleeve and steel tubular valve
Description
(Case Qty 6 Required)
How It Works
- To disconnect, begin by holding the hose on the nipple side with three of your fingers, leaving your thumb and index finger free.
- Grab the sleeve with your thumb and index finger and begin to pull the sleeve towards the palm of your hand.
- After pulling the sleeve, the nipple will move out of the coupler slightly. Continue to hold the hose and coupler sleeve until all air is fully exhausted.
- After the line is fully exhausted, you are able to safely separate the nipple from the coupler.
Includes
2FF2-B, D2M2
Safety Notes
It is important to be safe when installing quick disconnect couplings into a pneumatic circuit. Never install a pneumatic coupling directly into an air tool, use a piece of hose that is at least 18" long, between the tool and the coupling, to prevent damage to the coupling. To protect the operator, safety devices, such as a safety check valve and safety cable should be installed in case there is a hose or coupling failure.
Specifications
- Rated pressure for connected Brass Coupler & Brass Plug: 300 PSI (20 bar) Maximum Working and 8, 500 PSI (586 bar) Burst
- Rated pressure for connected Brass Coupler & Steel Plug: 500 PSI (35 bar) Maximum Working and 9, 000 PSI (620 bar) Burst
- Rated pressure when connected with Steel F-Series Manual Couplers: 500 PSI (35 bar) Maximum Working and 6, 500 PSI (448 bar) Burst
- Rated pressure when connected with Brass F-Series Manual Couplers: 500 PSI (35 bar) Maximum Working and 9, 000 PSI (620 bar) Burst
#6044518
Brand
Dixon
Model
PND-DQCKIT5
#6044520
Brand
Dixon
Model
PND-F07-200AC
#6044512
Brand
Dixon
Model
PND-DFG2
#6044501
Brand
Dixon
Model
PND-450-4S
#6044515
Brand
Dixon
Model
PND-DQCKIT2
| Brand | Cle-Line |
| Model | C21189 |
