Categories

Add products to your shopping cart

Subtotal

View cart
  • BRAND: Dixon
  • SKU: 2934446
  • CONDITION: NEW
  • MODEL: D4S4

DIXON D4S4 1/2" IND NIPPLE 1/2" BARB STEEL 850511

$4.02 Each

NEW

  • Free shipping on orders over $20
  • Shipping from: See locations
  • Typically ships in: 1 day

Select Quantity (minimum 4)

Additional Description

Specifications
  • Rated pressure when connected with Brass D-Series Automatic Couplers: 500 PSI (35 bar) Maximum Working and 14,000 PSI (965 bar) Burst
  • Rated pressure when connected with Steel F-Series Manual Couplers: 500 PSI (35 bar) Maximum Working and 15,500 PSI (1,070 bar) Burst
Construction
  • Machined components are manufactured using solid bar stock.
  • Steel componentry is plated using ROHS Compliant Trivalent Chrome.
Compatibility & Interchange Data
  • Foster 3, 4, 5 and 6 Series
  • Parker 30- Series Automatic Interchange & Parker 20-Series Manual Interchange
  • Hansen 3000, 4000, 5000 and 6000 & Hansen 1000, 400 and 500
How it works
  • To disconnect, begin by holding the hose on the nipple side with three of your fingers, leaving your thumb and index finger free.
  • Grab the sleeve with your thumb and index finger and begin to pull the sleeve towards the palm of your hand.
  • After pulling the sleeve, the nipple will move out of the coupler slightly. Continue to hold the hose and coupler sleeve until all air is fully exhausted.
  • After the line is fully exhausted, you are able to safely separate the nipple from the coupler.
Safety notes
  • It is important to be safe when installing quick disconnect couplings into a pneumatic circuit. Never install a pneumatic coupling directly into an air tool, use a piece of hose that is at least 18" long, between the tool and the coupling, to prevent damage to the coupling. To protect the operator, safety devices, such as a safety check valve and safety cable should be installed in case there is a hose or coupling failure.
  • Operating pressure for couplings utilizing hose barb connections may be dramatically reduced to that of the hose rating and/or hose end connection combination. Consult hose manufacturer's catalog for hose end connection ratings. If in doubt, test under controlled conditions for suitability to application.
  • Dixon cannot assume liability for misapplication of production resulting in equipment down-time, lost production, and/or personal injury including death.
  • WARNING: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm. Do not use in connection with drinking water. Wash hands after handling.
Part Number D4S4
Material Steel
Hose ID 1/2"
Maximum OD 0.75" (19.1mm)
Body Size 1/2"
Length 2.53" (64.3mm)
Pressure Rating See Product Details
Temperature Range -40°F to +250°F (-40°C to +121°C)
Optional Pkg/Box Qty 10
Weight Lb 0.1100

Specifications:

Hose ID 1/2"
Length 2.53"
Material Steel
Hose Id 1/2"

Return policy

Item must be unused.

Item must be in it's original package.

This item is shipping from locations below:

Product's availability