We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Hubbell Wiring WS1001I VAC SENSORPIR120V 500WIV
MODEL WS1001I
This vendor has a minimum order quantity of 7. Order minimum ($) may be applied. Add desired QTY to cart and proceed to checkout to view minimum
Contact supplier for technical support on: jruvalcaba@hubbell.c
$69.71 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Brand Minimum Order Quantity: 7
Typically Ships in: 1 day
Returnable: See conditions
Application
Compatible with most LED and CFL
Color
Ivory
Dimensions
4.15 in x 1.82 in x 1.62 in
Height
1.62 in
Humidity
20% to 90% non-condensing relative humidity
Indicator(s) type
PIR= Red LED
Industry Standard(s)
cULus Listed To UL773A
Item type
Passive Infrared Wall Switches
Length
4.15 in
Material
ABS (Acrylonitrile butance styrene - Thermoplastic polymer)
Mounting Height
3.5-4.5 ft
Operating temperature
32F to 122F (0C to 50C) with rate of change not exceeding 20F(11C) per hour
Photocell
Yes
Series
Passive Infrared
Storage temperature range
-40F to 150F (-40C to 65C)
Type
Manual
Voltage
120 VAC
Voltage rating description
120V AC
Width (in)
1.82
Hubbell Wiring Device-Kellems WS1001I
UPC: 783585256269 | UNSPSC: 39122236 | GTIN: 00783585256269
Lighting Controls & Ballasts > Occupancy & Vacancy Sensors > Wall Mount Vacancy Sensors
Wiring Device-Kellems H-MOSS Wall Switch Vacancy Sensor, 1-Circuit Adjustable Standard, Series: WS Series, 120 VAC, 0 to 1000 W, 1/6 hp, Passive Infrared Sensor, 1200 sq-ft Coverage, 20 s to 30 min Delay, CFL/Incandescent/LED Lamp, Screw Terminal, Manual On Control Output, Threaded/Wall Mount, -32 to 122 deg F, ABS, Ivory, 4.15 in H x 1.82 in W
Features:
- No neutral required, fast retrofits
- Manual adjusting, manual ON operation
- 0 to 1000 W, 120 VAC incandescent, 0 to 1000 W, 277 VAC ballast, 1/6 hp
- Designed for use on 120 VAC circuits, no neutral required, fast retrofits
- Steel mounting strap
Specs:
| Series | WS Series |
|---|---|
| Type | 1-Circuit Adjustable Standard |
| Color | Ivory |
| Material | ABS |
| Dimensions | 4.15 in H x 1.82 in W |
| Coverage | 1200 sq-ft |
| Voltage Rating | 120 VAC |
| Power Rating | 0 to 1000 W, 1/6 hp |
| Mounting Type | Threaded/Wall |
| Connection Type | Screw Terminal |
| Lamp Type | CFL/Incandescent/LED |
| Temperature Rating | -32 to 122 deg F |
| Time Delay | 20 s to 30 min |
| Sensor Type | Passive Infrared |
| Control Output | Manual On |
Packaging:
| Length | 4.9 in |
|---|---|
| Width | 2.3 in |
| Height | 10.1 in |
Certifications/Standards:
UL 773A | cULus Listed | CSA Certified | CEC Title 24 Compliant | UL94 V-0 Flammability Rating
SKU: 5018609
Thank you for carrying hubble and wiremold
With Hubble I am able to meet UL a smaller conduit for four #6 THHN wires than if I used Wiremold. The Hubble version is hard to obtain because Wiremold dominates this sector.
Read moreSKU: 1100550
Not bad
Unfortunately the mounting holes for this receptacle did not match the Arlington DBVS2C-1 Low Profile IN BOX Electrical Box. Otherwise it is a nice product.
Read moreSKU: 1019832
The right stuff
Worry free order. Came fast and exactly as described. Will use MRO again.
Read more
#5022123
Brand
Hubbell Wiring
Model
WS1001I
#5806124
Brand
Hubbell Wiring
Model
WS1001LA
| Brand | Omron |
| Model | CJ1W-NC213 |
| Brand | Dixon |
| Model | WA2 |
| Brand | Band-It |
| Model | BFES-A1230-024 |
| Brand | Gates Rubber |
| Model | AX88 |
| Brand | Hubbell Wiring |
| Model | CFB4GS1R8ADAPT |
SKU: 5018609
Thank you for carrying hubble and wiremold
With Hubble I am able to meet UL a smaller conduit for four #6 THHN wires than if I used Wiremold. The Hubble version is hard to obtain because Wiremold dominates this sector.
Read moreSKU: 1100550
Not bad
Unfortunately the mounting holes for this receptacle did not match the Arlington DBVS2C-1 Low Profile IN BOX Electrical Box. Otherwise it is a nice product.
Read moreSKU: 1019832
The right stuff
Worry free order. Came fast and exactly as described. Will use MRO again.
Read moreItem must be unused.
Item must be in it's original package.
Restocking, shipping and handling fees may apply to any return with this manufacturer.
For more information please consult https://www.mrosupply.com/page/returnwarranty-policy/