We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
JET 354551 J-A5818 15" Variable Speed Floor Model Drill Press 230/460V
MODEL 354551
This vendor has a minimum order quantity of 2. Order minimum ($) may be applied. Add desired QTY to cart and proceed to checkout to view minimum
Contact supplier for technical support on: 833 383 6800
$3,027.80 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Brand Minimum Order Quantity: 2
Typically Ships in: 1 day
Returnable:No
Base Dimensions (In.)
20-7/16 x 14-3/16
Base Work Table (In.)
12-1/8 x 11-13/16
Column Diameter (In.)
3
Distance Column to Spindle (In.)
7-1/2
Drilling Capacity Cast Iron (In.)
5/8
Drilling Capacity Mild Steel (In.)
1/2
Drills to Center of Circle (In.)
15
Height
70 in
Length
31 in
Motor (HP)
1 HP, 230/460V, 3Ph
Overall Dimensions (L x W x H) (In.)
30 x 20 x 71
Range of Spindle Speeds (RPM)
400 - 5,000
Spindle Distance to Base (In.)
44-1/2
Spindle Distance to Table (Max.) (In.)
25-3/4
Spindle Taper (In. x TPI)
MT-2
Spindle Travel (In.)
6
Style (Type)
Variable
T-Slot Centers (In.)
5-5/16
T-Slots Number and Size (In.)
2 and 1/2
Table Size (L x W) (In.)
15 x 18
Table Travel (In.)
16-3/4
Weight (Lbs.)
426
Width
31 in
Work Table Weight Capacity (Lbs.)
90
These JET drill presses use a variable speed motor with the stepped-pulley system and come equipped with a continuously variable transmission. This enables use at a wide range of speeds, as well as the ability to change speed during operation. A scale-marked hand wheel that matches the desired machine speed is mounted to a reduction gearing system for precise operator control. This adjusts the gearing ratio between the motor's fixed pulley and the output shaft's variable pulley, changing the speed of the chuck. A tensioner pulley is implemented in the belt transmission to take up or release the slack in the belt as the speed changes.
JET Floor Drill Press, Spline Drive, 1/2 in Chuck, 15 in Swing, MT-2 Spindle Taper, 6 in Spindle Travel, 400 to 5000 rpm Spindle Speed, 25-3/4 in Spindle to Table Distance, 7-1/2 in Spindle to Column Distance, 15 x 18 in Table, 90 lb Table Load, 45 deg Right/Left Table Tilt, 20-7/16 x 14-3/16 in Base, 3 in Column Dia, 1 hp, 230/460 VAC, 6.2/3.1 A, 30 in L x 20 in W x 71 in H
Features
- Full bearing support on quill for maximum spindle stiffness
- Hand wheel speed adjustment of 400 to 5000 rpm
- Large 2-1/4 in quill for greater accuracy
- 3 in column diameter for maximum head support
- 6 in stroke for deep hole application
- Accurate depth stop for precise hole depths
- 1/2 in drill chuck and arbor included
- Safety collar
- Variable speed
Includes: LED Readout
SKU: 6106466
Rating of purchase of jet drum sander
First, the bad part. It took months to get this machine. As the estimated shipment date drew near, it was pushed be a week. Disappointment! However, I understand the supply chain issues under the current administration and do not fault the company. From the date of shipment notification, the lapse time was approximately 3 days. It arrived in a crate and was well packed within. On the fourth day it was assembled and put into use. This drum sander functions great. It is a replacement for a Delta drum sander I had prrchased 20 years ago. It was destroyed by movers when we moved to TX. Originally, I purchased another Delta sander, however, when it arrived I discovered that it basically had no warranty It went back. This sander is well made and I expect will last another 20 years. Whenever I contacted MRO with a question, they were courteous and prompt in providing me with the answer. I would definitely consider future purchases with them.
Read more
| Brand | Schunk |
| Model | 431143 |
| Brand | Littelfuse |
| Model | LSSW |
| Brand | Champion |
| Model | 705-1/8 |
| Brand | Flexco |
| Model | 30464 |
| Brand | Sunex Tools |
| Model | 318MZUD |
| Brand | Cleveland |
| Model | C40020 |
SKU: 6106466
Rating of purchase of jet drum sander
First, the bad part. It took months to get this machine. As the estimated shipment date drew near, it was pushed be a week. Disappointment! However, I understand the supply chain issues under the current administration and do not fault the company. From the date of shipment notification, the lapse time was approximately 3 days. It arrived in a crate and was well packed within. On the fourth day it was assembled and put into use. This drum sander functions great. It is a replacement for a Delta drum sander I had prrchased 20 years ago. It was destroyed by movers when we moved to TX. Originally, I purchased another Delta sander, however, when it arrived I discovered that it basically had no warranty It went back. This sander is well made and I expect will last another 20 years. Whenever I contacted MRO with a question, they were courteous and prompt in providing me with the answer. I would definitely consider future purchases with them.
Read more