We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Kipp K0631.7105 indexing plunger, size 1, with M10x1 internal thread and 5mm pin diameter. Steel hardened body, form C with locking slot, short version. Spring force initial pressure F1 approx. 5 N, final pressure F2 approx. 12 N. Travel S 5 mm. Without locknut.
MODEL K0631.7105
$21.32 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: Yes
D
5
D1
M10x1
D2
21
Fx30?
1,3
L
34,5
L1
8
L2
7
Spring force final pressure F2 approx. N
12
Spring force initial pressure F1 approx. N
5
style
C
SW1
13
Travel S
5
Material:
Steel version
Indexing pin hardened:
grade 5.8
Stainless steel version
Indexing pin not hardened:
Threaded body 1.4305 (AISI 303 equivalent).
Indexing pin 1.4305 (AISI 303 equivalent).
Mushroom grip thermoplastic, black-gray or traffic red RAL 3020.
Version:
Steel version:
Indexing pin hardened, ground, black oxidized.
Stainless steel version:
Indexing pin not hardened, ground, bright.
Note:
Indexing plungers are used to prevent any change in position due to lateral forces. A new locking position can only be set after the pin has been manually disengaged. style C or D is recommended for applications in which the pin is disengaged over extended periods and should be prevented from springing back.
On request:
Special versions.
Accessory:
Spacer rings K0665
