We never sell your data to third parties
Kipp K0345.01412 indexing plunger, size 4, with 1/2-12 internal thread. Form J design with threaded pin, without locknut. Stainless steel construction for corrosion resistance. Suitable for indexing and positioning applications in jigs and fixtures.
MODEL K0345.01412
$41.33 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: Yes
Material:
Steel version
Indexing pin hardened:
grade 5.8.
Stainless steel version
Indexing pin hardened:
Threaded body 1.4305 (AISI 303 equivalent).
Indexing pin 1.4034(AISI 420 equivalent).
Indexing pin not hardened:
Threaded body 1.4305 (AISI 303 equivalent).
Indexing pin 1.4305 (AISI 303 equivalent).
Version:
Steel version:
Indexing pin hardened, ground, black oxidized.
Stainless steel version:
Indexing pin hardened, ground and bright.
Indexing pin not hardened, ground and bright.
Note:
Indexing plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the pin has been disengaged.
Special grips can be fitted on the projecting threaded pin. This pin is also suitable for automatic actuation by e.g. program controlled pneumatic cylinder or by remote control using bowden cables.
A washer is available to aid screwing in the indexing plungers. The washer is placed on the threaded body so that the carrier pins engage in the slot.
On request:
Special versions.
Accessory:
Spacer rings K0665
| Brand | NK North America Inc. |
| Model | K0140.10X25 |
| Brand | NK North America Inc. |
| Model | K0051.1611451 |
| Brand | NK North America Inc. |
| Model | K0155.1065 |
| Brand | NK North America Inc. |
| Model | K0154.2066 |
| Brand | NK North America Inc. |
| Model | K0247.02A36X40 |
| Brand | Telemecanique |
| Model | LC1D150G7 |