Kipp K1584.18105 indexing plunger with eccentric handle and detent, size 1, 5 internal thread, form A without locknut. Stainless steel body and plunger pin for corrosion resistance. Eccentric handle provides quick clamping and release in fixturing and positioning applications. Suitable for use in jigs, fixtures, and machine tool setups requiring repeatable locating.

Material:

Steel version:
Threaded body 1.0718.
Indexing pin 1.0718.

Stainless steel version:
Threaded body 1.4305 (AISI 303 equivalent)(AISI 303 equivalent).
Indexing pin 1.4305 (AISI 303 equivalent)(AISI 303 equivalent).
Handle fiberglass reinforced thermoplastic PPA (high temperature resistant).

Version:

Steel version:
threaded body, black oxidized.
Indexing pin hardened, ground and black oxidized.

Stainless steel version:
threaded body, bright.
Indexing pin ground and left bright.

Grip black or traffic red RAL3020.

Note:

Indexing plungers are used where it is necessary to prevent changes of position due to lateral forces. A new locking position can be set only after the plunger has been manually disengaged. With this indexing plunger a cam lever is used to retract the pin. The indexing plunger remains unlocked as long as the handle is positioned over the dead center of the cam.
The ergonomic cam lever enables light handling with low effort.

Temperature range:

Continuous operating temperature acc. to IEC 216 max. 160°C.
Temporary operating temperature max. 250°C.

Benefits:

Simple and quick operation.
Suitable for high temperature applications.
With integrated detent function.

On request:

Special versions.

Accessory:

Spacer rings K0665
Positioning bushings for indexing plunger K1290
Mounting Brackets, metric K0638