We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Toshiba F8004VLF4BM 800 HP 1800 RPM 5810UZ frame ODP high efficiency three-phase motor. This open drip proof enclosure is designed for indoor or protected outdoor applications where airflow is adequate. The 460V 60 Hz motor delivers 1800 RPM at 60 Hz and is built for continuous duty. High efficiency design reduces energy costs and meets applicable efficiency standards.
MODEL F8004VLF4BM
$68,053.05 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Typically Ships in: 3 days
Returnable: See conditions
Amperage
968
Application Type
Compressor Motors, General Purpose AC Motors
Bearing Type
Ball/Roller
Constant Torque Speed Range
4:01
Enclosure
ODP
Frame
5810UZ
Height
29.3 in
HP
800
Hz
60
Insulation Class
Class F
Length
67.8 in
Material
Cast Iron
Mounting Type
Floor/Horizontal Footed
Number of Speeds
1
Phase
3
Rotation
CW/CCW
RPM
1700 - 1800
Service Factor
1.15
Shaft Diameter
5.375 in
Shaft Length
11.63 in
Special Features
Low Voltage Motors, Vector (Inverter) Duty Motors
Temperature Rating
-13 to 104 deg F
Torque Rating
2350 ft-lb
Type
Continuous-Duty Type TIKK
Variable Torque Speed Range
10:01
Voltage
460
Width
29.6 in
Toshiba Toshiba F8004VLF4BM
UPC: | UNSPSC: 26101112 | GTIN:
Electric Motors > AC Motors
Toshiba AC Motor, Continuous-Duty Type TIKK, Compressor Motors, General Purpose AC Motors Application, Low Voltage Motors, Vector (Inverter) Duty Motors Special Features, 800 hp, 460 VAC, 968 A, 60 Hz Frequency, 3 ph ph, 1800 rpm Speed, 1 Speed, Open Drip-Proof Enclosure, 5810UZ Frame, 5.375 in Dia x 11.63 in L Shaft, CW/CCW Rotation, 1.15 Service Factor, Ball/Roller Bearing, 2350 ft-lb Torque, Floor/Horizontal Footed Mounting, -13 to 104 deg F, Insulation Class: Class F, Cast Iron, 4:1 Constant Torque Speed, 10:1 Variable Torque Speed, 67.8 in L x 29.6 in W x 29.3 in H Dimensions
Features:
- NEMA design B
- IP22 protection
- Polyurea base grease
- High efficiency
- Roller bearing on P.E. with plugs
- UZ-shaft end
- 4-pole
Specs:
| Variable Torque Speed Range | 10:1 |
|---|---|
| Constant Torque Speed Range | 4:1 |
| Service Factor | 1.15 |
| Special Features | Low Voltage Motors, Vector (Inverter) Duty Motors |
| Application Type | Compressor Motors, General Purpose AC Motors |
| Insulation Class | Class F |
| Shaft Size | 5.375 in Dia x 11.63 in L |
| Torque Rating | 2350 ft-lb |
| Phase | 3 ph |
| Horsepower | 800 hp |
| Number of Speeds | 1 |
| Rotation | CW/CCW |
| Frame | 5810UZ |
| Bearing Type | Ball/Roller |
| Temperature Rating | -13 to 104 deg F |
| Enclosure Type | Open Drip-Proof |
| Speed | 1800 rpm |
| Frequency Rating | 60 Hz |
| Mounting Type | Floor/Horizontal Footed |
| Amperage Rating | 968 A |
| Voltage Rating | 460 VAC |
| Dimensions | 67.8 in L x 29.6 in W x 29.3 in H |
| Material | Cast Iron |
| Type | Continuous-Duty Type TIKK |
Packaging:
Certifications/Standards:
ee CC027B/CC020A | NEC Certified
2 Years
