We never sell your data to third parties
Toshiba B0508FLF3OMHJ EQPIII 841 inverter duty motor delivers 50 HP at 900 RPM from a 404T frame. This totally enclosed fan cooled (TEFC) three-phase 575V motor is rated NEMA Premium Efficiency and is designed for variable frequency drive applications requiring reliable inverter duty performance.
MODEL B0508FLF3OMHJ
Contact supplier for technical support on: tic-dist1@toshiba.co
$18,994.92 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Typically Ships in: 3 days
Returnable: See conditions
Amperage
63
Application Type
Compressor Motors, General Purpose AC Motors
Bearing Type
Ball
Constant Torque Speed Range
20:01
Enclosure
TEFC
Frame
404T
Height
19.5 in
HP
50
Hz
60
Insulation Class
Class F
Length
42.2 in
Material
Cast Iron
Mounting Type
Dual/Floor/Horizontal Footed
Number of Speeds
1
Phase
3
Rotation
CW/CCW
RPM
900
Series
841
Service Factor
1.15
Shaft Diameter
2-7/8 in
Shaft Length
7-1/4 in
Special Features
Low Voltage Motors, Severe Duty Motors, Vector (Inverter) Duty Motors
Temperature Rating
-13 to 104 deg F
Torque Rating
296 ft-lb
Type
Continuous-Duty Type TKKH
Variable Torque Speed Range
60:01:00
Voltage
575
Width
20.5 in
Toshiba Toshiba B0508FLF3OMHJ
UPC: | UNSPSC: 26101112 | GTIN:
Electric Motors > AC Motors
Toshiba EQP Global AC Motor, Continuous-Duty Type TKKH, Series: 841, Compressor Motors, General Purpose AC Motors Application, Low Voltage Motors, Severe Duty Motors, Vector (Inverter) Duty Motors Special Features, 50 hp, 575 VAC, 63 A, 60 Hz Frequency, 3 ph ph, 900 rpm Speed, 1 Speed, Totally Enclosed Fan Cooled (TEFC) Enclosure, 404T Frame, 2-7/8 in Dia x 7-1/4 in L Shaft, CW/CCW Rotation, 1.15 Service Factor, Ball Bearing, 296 ft-lb Torque, Dual/Floor/Horizontal Footed Mounting, -13 to 104 deg F, Insulation Class: Class F, Cast Iron, 20:1 Constant Torque Speed, 60:1 Variable Torque Speed, 42.2 in L x 20.5 in W x 19.5 in H Dimensions
Features:
- NEMA design B
- IP56 protection
- Oversized 300 series bearings
- Labyrinth seal on all frames
- Multiple drain provisions for horizontal and vertical mounting
- 100% no load commercial test and vibration test on all motors
- 8-pole
- T-shaft end
- Open ball bearing with plugs
Specs:
| Variable Torque Speed Range | 60:1 |
|---|---|
| Constant Torque Speed Range | 20:1 |
| Service Factor | 1.15 |
| Special Features | Low Voltage Motors, Severe Duty Motors, Vector (Inverter) Duty Motors |
| Application Type | Compressor Motors, General Purpose AC Motors |
| Insulation Class | Class F |
| Shaft Size | 2-7/8 in Dia x 7-1/4 in L |
| Torque Rating | 296 ft-lb |
| Phase | 3 ph |
| Horsepower | 50 hp |
| Number of Speeds | 1 |
| Rotation | CW/CCW |
| Frame | 404T |
| Bearing Type | Ball |
| Temperature Rating | -13 to 104 deg F |
| Enclosure Type | Totally Enclosed Fan Cooled (TEFC) |
| Speed | 900 rpm |
| Frequency Rating | 60 Hz |
| Mounting Type | Dual/Floor/Horizontal Footed |
| Amperage Rating | 63 A |
| Voltage Rating | 575 VAC |
| Dimensions | 42.2 in L x 20.5 in W x 19.5 in H |
| Material | Cast Iron |
| Type | Continuous-Duty Type TKKH |
| Series | 841 |
Packaging:
Certifications/Standards:
CE/CSA/NEC Certified | ee CC027B | IEEE 112 | NEMA Premium® MG1 Part 31 | UR Listed
5 Years
| Brand | Toshiba |
| Model | 0052XDSB41A-P |
| Brand | Techtop |
| Model | GR3-CI-TF-447T-4-RR-E-200 |
| Brand | NTN Bearing |
| Model | 71914HVDUJ94 |
