Categories

Add products to your shopping cart

Subtotal

View cart

Teco-Westinghouse HB0206C AEHH8BCF MAX-E2/841 FOOTED C-FACE HP: 20 RPM: 1200 FRAME: 286TC

$2,358.89 Each

NEW

  • Free shipping on orders over $20
  • Shipping from: See locations
  • Typically ships in: 1 day
  • Payment methods:
  • Returnable: Yes
  • Weight: 565.0 lb
  • UOM: EA

Select Quantity

Additional Description

  • Three Phase, 60 Hz, 1.15 Service Facto inch dia (Continuous); 50 Hz, 1.0 Service Facto inch dia (Continuous)
  • CSA Certified for Class I, Div. 2, Groups B, C, D - Temp Code T3 Maximum
  • CSA Certified for Class II, Div. 2, Groups F & G - Temp Code T3 Maximu inch dia (Frame 444T and Above)
  • Meets or Exceeds IEEE 841 Standards
  • Meets IEEE 45 Marine Duty and ABS Design Assessment up to 150 HP
  • Extended Warranty - 60 Months from Date of Manufacture
  • Class F Insulation
  • Class B Temperature Rise
  • NEMA Design B Torques as a Minimum; Various Ratings also Meet Design C
  • Cast Iron Frame, End Brackets & Fan Cover and Main Conduit Box
  • Grounding Terminal Inside Main Conduit Box with additional Foot Grounding Provision
  • Oversized Main Conduit Box Rotatable in 90 Degree Increments - F1 Mounted
  • Designed for 50 degrees C Ambient Temperature
  • Designed for 3300 ft. Elevation
  • Bi-Directional Rotation; Except 2 Pole "Hybrid" and F# 5000 and Larger Ratings are Counter-Clockwise facing the DE
  • 1045 Carbon Steel Shaft
  • Aluminum Die Cast Squirrel Cage Rotor Construction for F# 140T - 449T Copper/Copper Alloy Rotor Construction for F# 5000 and Larger
  • Paint System: 2 Part Epoxy
  • Paint Color: Blue - Munsell 5PB 3/8
  • High Quality Bal inch dia (or Roller) Bearings Regreasable with Mobil Polyrex EM Grease
  • Automatic Grease Discharge Fittings
  • VBXX INPRO Seals Installed on Both Ends
  • Stainless Steel Nameplate and Hardware
  • Stainless Steel Automatic Breather Drain
  • New Dual Column Design Nameplate as Standar inch dia (60/50 Hz)
  • Suitable for Inverter Dut inch dia (PWM - Pulse Width Modulation) per NEMA MG-1, Part 30
  • Inverter Duty Speed Range: 20:1 Variable Torque, 10:1 Constant Torqu inch dia (350 HP and Larger are 3:1 Constant Torque)
  • Motors are U.L. Recognized, CSA Approved
  • 3 Leads Only
  • Dual Drilled Feet Available on Most Ratings - Longer Frame inch dia (i.e. 145T Drilled also for 143T)
  • Vibration Not to Exceed 0.08 Inches Per Second
  • Noise Level Not to Exceed 85 dB(A) at 1 Meter Unloaded

Specifications:

Frame 286TC
HP 20
RPM 1200
Enclosure TEFC
Voltage 460

This item is shipping from locations below:

Product's availability