We never sell your data to third parties
Grundfos 96937300 MMS 10000 mechanical seal kit for 175 HP (132 kW) 3-phase 440-480V 10-inch submersible pump motor. SIC/SIC shaft seal, IP68 enclosure, direct-on-line start, cast iron construction. Rated speed 2900-2920 rpm, 50 Hz, rated current 275-270-270 A. For MMS 10000 submersible motors in deep-well applications.
MODEL 96937300
$26,332.59 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: Yes
Axial load max
5000 kg
Breakdown torque
260-290-310 %
Built-in temp transmitter
No
Cos phi - power factor
0.87-0.84-0.81
Enclosure class (IEC 34-5)
IP68
Locked-rotor torque
170-180-200 %
Mains frequency
50 Hz
Max liquid t at 0.15 m/sec (°C)
40
Max liquid t at 0.5 m/sec (°C)
45
Moment of inertia
0.158 kg m²
Motor
Cast iron
Motor diameter
10 in
Motor efficiency at 1/2 load
86-85 %
Motor efficiency at 3/4 load
88-87 %
Motor efficiency at full load
88 %
Motor type
MMS10000
Motor version
T45
Product name
MMS 10000
Product no
96937300
Rated current
275-270-270 A
Rated full-load torque
435 Nm
Rated power - P2
132 kW
Rated speed
2900-2910-2920 rpm
Rated voltage
3 x 440-460-480 V
Shaft seal for motor
SIC/SIC
Start method
direct-on-line
Starting current
530-570-590 %
Voltage tolerance
+6/-10 %
Winding resistance
0.052 ohm
Windings
PE2/PA
Grundfos Grundfos 96937300
UPC: | UNSPSC: 26101107 | GTIN:
Electric Motors > AC Motors
Grundfos Submersible Motor, 3-Wire, 175 hp, 380 to 400 to 415 VAC, 275/270/270 A, 50 Hz, 3 ph, 2900 to 2910 to 2920 rpm, Service Factor: 1.15, Thrust Bearing, 435 N-m, Horizontal Mount, Cast Iron, 10 in Dia
Features:
- In MMS motors the stator can be rewound locally, ensuring minimal cost and downtime
- The standard mechanical shaft seal used in the MS/MMS motors is very easy to service and replace
- Michell-type thrust bearings with high thrust capacity
- Quickly builds up a water film during start-up to ensure high thrust capacity
- Protection against up thrust
- High-efficiency
- PVC or PE/PA windings
- Can be fitted on all Grundfos SP and SP-G pumps
Specs:
| Service Factor | 1.15 |
|---|---|
| Torque Rating | 435 N-m |
| Phase | 3 ph |
| Horsepower | 175 hp |
| Bearing Type | Thrust |
| Speed | 2900 to 2910 to 2920 rpm |
| Frequency Rating | 50 Hz |
| Mounting Type | Horizontal |
| Amperage Rating | 275/270/270 A |
| Voltage Rating | 380 to 400 to 415 VAC |
| Dimensions | 10 in Dia |
| Material | Cast Iron |
| Type | 3-Wire |
Certifications/Standards:
ASTM Specified
SKU: 5024341
Great experience
Very responsive. Great communication. Easy to deal with and great follow up. Definitely will do business again.
Read moreSKU: 5023166
Great service
Ordered a Grundfos well pump for my community. Communication via email very good and shipping time for the order was well under my expectations. I'm happy and will be back for other support items for the water operations.
Read moreSKU: 6099694
Awesome company
They are super helpful and we’re the only company that had the pump that I needed to my water in my house running again!
Read more
SKU: 5024341
Great experience
Very responsive. Great communication. Easy to deal with and great follow up. Definitely will do business again.
Read moreSKU: 5023166
Great service
Ordered a Grundfos well pump for my community. Communication via email very good and shipping time for the order was well under my expectations. I'm happy and will be back for other support items for the water operations.
Read moreSKU: 6099694
Awesome company
They are super helpful and we’re the only company that had the pump that I needed to my water in my house running again!
Read more