We never sell your data to third parties
SKF / CR Seals 14848 small bore radial shaft oil seal for light-duty applications. Nitrile (NBR) sealing lip with spring-loaded garter spring for consistent radial sealing force. Operating temperature range: -40°F to 250°F. Suitable for electric motors, gearboxes, pumps, and rotating equipment. Prevents lubricant leakage and contaminant ingress.
MODEL 14848
Contact supplier for technical support on: 267-436-6000
$15.13 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 3 days
Returnable:No
Auxiliary lip
Yes
Design
HMA22
Housing bore diameter
50.521 mm, 1.989 in
Maximum operating temperature
100.0 °C, 212.0 °F
Maximum operating temperature (°F)
100.0 °C, 212.0
Minimum operating temperature
-40.0 °C, -40.0 °F
Minimum operating temperature (°F)
-40.0 °C, -40.0
Permissible circumferential speed
6.74 m/s
Rotational speed
3379.0 r/min
Seal width
6.35 mm, 0.25 in
Sealing lip material
Nitrile rubber (NBR)
Shaft diameter
38.1 mm, 1.5 in
Type of outside diameter
Metal-cased
Unit system
Inch
Radial shaft seal with metal case and double sealing lip, for grease
Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. HMA22 seals are designed with a sealant coated metal case. They have a conventional double sealing lip made of nitrile rubber. Typical applications include grease lubricated agriculture machinery.
- Maximise the exclusion of contamination
- Accommodate low speed
- Easy installation
SKU: 1898441
Mro supply - seals
I use a lot of the SKF6119 seals for chainsaw repairs and MRO always has the best prices and fast shipping.
Read more
| Brand | MCR Safety |
| Model | 9410KM |
SKU: 1898441
Mro supply - seals
I use a lot of the SKF6119 seals for chainsaw repairs and MRO always has the best prices and fast shipping.
Read moreDisclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF