We never sell your data to third parties
SKF / CR Seals (formerly CR Seals) 33645 is a small bore radial shaft oil seal designed for light-duty sealing applications. This seal prevents lubricant leakage and excludes contaminants in electric motors, gearboxes, and pumps. Suitable for use in industrial rotating equipment where a compact seal is required.
MODEL 33645
Contact supplier for technical support on: 267-436-6000
$36.85 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 3 days
Returnable:No
Auxiliary lip
No
Design
CRW1
Housing bore diameter
104.78 mm, 4.125 in
Maximum operating temperature
100.0 °C, 212.0 °F
Maximum operating temperature (°F)
100.0 °C, 212.0
Minimum operating temperature
-40.0 °C, -40.0 °F
Minimum operating temperature (°F)
-40.0 °C, -40.0
Permissible circumferential speed
10.02 m/s
Rotational speed
2220.0 r/min
Seal width
9.53 mm, 0.375 in
Sealing lip material
Nitrile rubber (NBR)
Shaft diameter
85.73 mm, 3.375 in
Type of outside diameter
Metal-cased with sealant coating on the outside diameter
Unit system
Inch
Radial shaft seal with metal case and SKF Wave lip, for oil or grease
Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
SKU: 300488
Works good great delivery time
The seals works as they should. Delivery time was good
Read moreSKU: 1898386
Small diameter seals
I use a lot of small diameter inch dimension seals for the repair of older chainsaws. MRO is a great resource for many seals with very competitive prices and free shipping for larger orders. I will continue to use MRO whenever I can.
Read more
| Brand | United Abrasives |
| Model | 35025 |
| Brand | Invertek |
| Model | ODP-2-36100-3H042-MN |
| Brand | PT Coupling |
| Model | 1291120L2 |
| Brand | Siemens Controls |
| Model | 7ME6910-1AA10-1AA0 |
| Brand | Rocky Mountain Twist |
| Model | 95102035 |
SKU: 300488
Works good great delivery time
The seals works as they should. Delivery time was good
Read moreSKU: 1898386
Small diameter seals
I use a lot of small diameter inch dimension seals for the repair of older chainsaws. MRO is a great resource for many seals with very competitive prices and free shipping for larger orders. I will continue to use MRO whenever I can.
Read moreDisclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF