We never sell your data to third parties
SKF / CR Seals 34700 small bore radial shaft oil seal for light-duty sealing applications. Features a nitrile rubber (NBR) sealing lip with spring loading for consistent radial force. Operating temperature range: -40°F to 250°F. Suitable for electric motors, gearboxes, pumps, and rotating equipment to prevent lubricant leakage and contaminant ingress.
MODEL 34700
Contact supplier for technical support on: 267-436-6000
$42.85 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 3 days
Returnable:No
Auxiliary lip
Yes
Design
CRSA1
Housing bore diameter
117.5 mm, 4.626 in
Maximum operating temperature
100.0 °C, 212.0 °F
Maximum operating temperature (°F)
100.0 °C, 212.0
Minimum operating temperature
-40.0 °C, -40.0 °F
Minimum operating temperature (°F)
-40.0 °C, -40.0
Permissible circumferential speed
10.13 m/s
Rotational speed
2196.0 r/min
Seal width
15.88 mm, 0.625 in
Sealing lip material
Nitrile rubber (NBR)
Shaft diameter
88.113 mm, 3.469 in
Type of outside diameter
Metal-cased
Unit system
Inch
Radial shaft seal with metal case, double sealing lip and auxiliary contacting lip, for oil or grease
Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRSA1 seals are designed with a single metal case, a single sealing lip made of elastomer for best sealing against the rotating shaft. The seal also has a garter spring to optimize sealing against the shaft and a dust lip to improve contamination ingress resistance.
- For oil or grease
- With garter spring
- Easy installation
SKU: 300488
Works good great delivery time
The seals works as they should. Delivery time was good
Read moreSKU: 1898386
Small diameter seals
I use a lot of small diameter inch dimension seals for the repair of older chainsaws. MRO is a great resource for many seals with very competitive prices and free shipping for larger orders. I will continue to use MRO whenever I can.
Read moreSKU: 1898441
Mro supply - seals
I use a lot of the SKF6119 seals for chainsaw repairs and MRO always has the best prices and fast shipping.
Read more
| Brand | AMI Bearings |
| Model | UEPPL206-20MZ20W |
| Brand | Martin Sprocket |
| Model | F14MX200S37-E |
| Brand | Rocky Mountain Twist |
| Model | 95008724 |
SKU: 300488
Works good great delivery time
The seals works as they should. Delivery time was good
Read moreSKU: 1898386
Small diameter seals
I use a lot of small diameter inch dimension seals for the repair of older chainsaws. MRO is a great resource for many seals with very competitive prices and free shipping for larger orders. I will continue to use MRO whenever I can.
Read moreSKU: 1898441
Mro supply - seals
I use a lot of the SKF6119 seals for chainsaw repairs and MRO always has the best prices and fast shipping.
Read moreDisclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF