We never sell your data to third parties
SKF / CR Seals (formerly CR Seals) 54929 is a radial shaft oil seal designed for small bore applications. This seal features a spring-loaded sealing lip for consistent radial force. Suitable for use in electric motors, gearboxes, pumps, and other rotating equipment to prevent lubricant leakage and exclude contaminants.
MODEL 54929
Contact supplier for technical support on: 267-436-6000
$100.06 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 3 days
Returnable:No
Auxiliary lip
Yes
Design
CRWHA9
Housing bore diameter
160274.0 mm, 6310.0 in
Maximum operating temperature
100.0 °C, 212.0 °F
Maximum operating temperature (°F)
100.0 °C, 212.0
Minimum operating temperature
-40.0 °C, -40.0 °F
Minimum operating temperature (°F)
-40.0 °C, -40.0
Seal width
301752.0 mm, 11880.0 in
Sealing lip material
Nitrile rubber (NBR)
Shaft diameter
1397.0 mm, 55.0 in
Radial shaft seal with double metal case, double SKF Wave lip and auxiliary non-contacting lip, for oil or grease
Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWHA9 seals are designed with a sealant coated double metal case. They have a double SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation. A garter spring in the seal and a non-contacting auxiliary lip optimize the sealing against the shaft.
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
SKU: 300488
Works good great delivery time
The seals works as they should. Delivery time was good
Read moreSKU: 301341
Great first impression
The site was easy to navigate. I placed the order and I was kept up to date with it’s processing and shipping progress. I would definitely use them again
Read more
| Brand | Siemens Controls |
| Model | 3RV2011-0HA15 |
| Brand | DAREX INDUSTRIAL |
| Model | LEX900 |
SKU: 300488
Works good great delivery time
The seals works as they should. Delivery time was good
Read moreSKU: 301341
Great first impression
The site was easy to navigate. I placed the order and I was kept up to date with it’s processing and shipping progress. I would definitely use them again
Read moreDisclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF