We never sell your data to third parties
SKF / CR Seals 57502 small bore radial shaft oil seal for light-duty applications. Features a nitrile rubber (NBR) sealing lip with spring-loaded garter spring for consistent radial force. Operating temperature range: -40°F to 250°F. Suitable for electric motors, gearboxes, pumps, and rotating equipment to prevent lubricant leakage and exclude contaminants.
MODEL 57502
Contact supplier for technical support on: 267-436-6000
$56.49 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 3 days
Returnable:No
Auxiliary lip
Yes
Design
HMA1
Housing bore diameter
161.93 mm, 6.375 in
Maximum operating temperature
100.0 °C, 212.0 °F
Maximum operating temperature (°F)
100.0 °C, 212.0
Minimum operating temperature
-40.0 °C, -40.0 °F
Minimum operating temperature (°F)
-40.0 °C, -40.0
Permissible circumferential speed
12.18 m/s
Rotational speed
1593.0 r/min
Seal width
6.35 mm, 0.25 in
Sealing lip material
Nitrile rubber (NBR)
Shaft diameter
146.05 mm, 5.75 in
Type of outside diameter
Metal-cased
Unit system
Inch
Radial shaft seal with metal case and double sealing lip, for grease
Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. HMA1 seals are designed with a sealant coated double metal case. They have a conventional double sealing lip made of nitrile rubber. Typical applications include grease lubricated agriculture machinery.
- Maximise the exclusion of contamination
- Accommodate low speed
- Easy installation
SKU: 1907550
Great service and product!
Doing boat repairs is trying at best when you are on the hard. While the clock tics by , the dollars add up. Being able to find, order and receive part in a timely fashoin is a tall order and MRO Supply was able to meet all of our needs! Great job MRO! We'll be back!
Read moreSKU: 300488
Works good great delivery time
The seals works as they should. Delivery time was good
Read moreSKU: 1898441
Mro supply - seals
I use a lot of the SKF6119 seals for chainsaw repairs and MRO always has the best prices and fast shipping.
Read more
SKU: 1907550
Great service and product!
Doing boat repairs is trying at best when you are on the hard. While the clock tics by , the dollars add up. Being able to find, order and receive part in a timely fashoin is a tall order and MRO Supply was able to meet all of our needs! Great job MRO! We'll be back!
Read moreSKU: 300488
Works good great delivery time
The seals works as they should. Delivery time was good
Read moreSKU: 1898441
Mro supply - seals
I use a lot of the SKF6119 seals for chainsaw repairs and MRO always has the best prices and fast shipping.
Read moreDisclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF