We never sell your data to third parties
SKF / CR Seals 409000 small V-ring axial shaft seal for rotating shafts. Flexible rubber lip seals against a counterface to prevent contaminant ingress and retain lubricant. Suitable for light-duty applications in electric motors, gearboxes, and agricultural equipment.
MODEL 409000
Contact supplier for technical support on: 267-436-6000
$785.91 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 3 days
Returnable:No
Design
VR1
Max shaft diameter
920.0 mm, 36.22 in
Min shaft diameter
875.0 mm, 34.449 in
Seal width
25.0 mm, 0.984 in
Sealing lip material
Nitrile rubber (NBR)
Shaft diameter, maximum
920.0 mm, 36.22 in
Shaft diameter, minimum
875.0 mm, 34.449 in
V-ring seal, VR1 design, North American standard, interchangeable with VA design
V-ring seals (V-rings) are all-rubber, axial shaft seals. They offer an easy-to-install solution for rotating shaft applications, including use as a secondary seal in highly contaminated environments. The VR1 design includes a standard cross section with a straight back side face. Being the most common type of V-rings, VR1 seals are typically used to protect bearing arrangements in gearboxes, electric motors and drives.
- Easy to install
- Cost-effective
- Reliable contamination exclusion
SKU: 1907550
Great service and product!
Doing boat repairs is trying at best when you are on the hard. While the clock tics by , the dollars add up. Being able to find, order and receive part in a timely fashoin is a tall order and MRO Supply was able to meet all of our needs! Great job MRO! We'll be back!
Read more
| Brand | Smith Bearings |
| Model | YR-3-1/2-C |
| Brand | Cooper Wiring |
| Model | AH530R6WDR |
SKU: 1907550
Great service and product!
Doing boat repairs is trying at best when you are on the hard. While the clock tics by , the dollars add up. Being able to find, order and receive part in a timely fashoin is a tall order and MRO Supply was able to meet all of our needs! Great job MRO! We'll be back!
Read moreDisclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF