We never sell your data to third parties
SKF / CR Seals 35X47X5 HMS4 R HMS4 single lip radial shaft oil seal for 35mm shaft diameter, 47mm housing bore, and 5mm seal width. Features an NBR sealing lip with spring-loaded garter spring for consistent radial sealing force. Operating temperature range: -40°F to 250°F (-40°C to 121°C). Suitable for electric motors, gearboxes, pumps, and rotating equipment to prevent lubricant leakage and contaminant ingress.
MODEL 35X47X5 HMS4 R
Contact supplier for technical support on: 267-436-6000
$5.85 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 3 days
Returnable:No
Bore diameter
47 mm
Design
HM4
Lip Material
R
Nominal Seal Width (b)
5 mm
Shaft diameter
35 mm
Specifications
| Principal dimensions | Design | Lip material | Pressure differential [MPa / psi] | Designation | US stock number | Notes | ||
|---|---|---|---|---|---|---|---|---|
| Shaft | Bore | Nominal seal width | ||||||
| d1 | b | |||||||
| mm | - | - | - | - | - | |||
| 35 | 47 | 5 | HM4 | R | - | 35X47X5 HM4 R | 13762 | |
| Brand | Bestorq |
| Model | 610-5M-25 |
| Brand | AMI Bearings |
| Model | UCFC209C4HR23 |
Disclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF