We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
$211.68 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
1.750" Type E Pump Seal
Description
Type E Head seals feature self adjusting elastomer bellows that compensate for abnormal shaft end play and primary face sealing wear. Effects of radial and axial shaft end play are minimized by uniform spring pressure.Positive drive is transmitted through the drive band and drive notches, which absorb breakout and running torque. Damaging stresses on the elastomer bellows are prevented. Slippage is eliminated, thus protecting shaft and sleeve against wear and scoring. The result is long seal life.The seal’s large single-coil spring is much sturdier than a multiple spring construction design. The spring is non-clogging, self-cleaning and will not foul up due to fluid contact. Corrosion and clogging problems are eliminated.
Applications
All types of rotary shaft equipment such as pumps, mixers, blenders, and compressors. Wide range of services from water and steam to chemicals and corrosives.
Operating ranges
Pressure: Up to 350 PSI
Temperature: -40°F - +425°F
Mating Ring: Type - -
Suitable for
| Manufacturer | Part No. | Nameplate Data |
|---|---|---|
| A-C PUMP | 52110871802 | |
| BERKELEY PUMPS | ||
| PACO | SL-8398 | |
| WEINMAN | Q26-223-Y34 |
SKU: 2185880
Speedy
This was a reorder of an item I had previously purchased. Had the item# so the ordering process was fast. Shipping was fast and free. Will definitely continue doing business with MRO.
Read moreSKU: 2185979
Ease and accuracy
This site was quite easy to use and locate what I needed. They provided many updates on receiving, shipping, and tracking of my order.
Read moreSKU: 2186686
Straight from the manufacturer
Item came straight from the manufacturer. just what we needed.
Read more
| Brand | Timken |
| Model | 29502-6419 |
| Brand | Timken |
| Model | 29602-8562 |
| Brand | Hubbell Wiring |
| Model | S1FP34BL |
SKU: 2185880
Speedy
This was a reorder of an item I had previously purchased. Had the item# so the ordering process was fast. Shipping was fast and free. Will definitely continue doing business with MRO.
Read moreSKU: 2185979
Ease and accuracy
This site was quite easy to use and locate what I needed. They provided many updates on receiving, shipping, and tracking of my order.
Read moreSKU: 2186686
Straight from the manufacturer
Item came straight from the manufacturer. just what we needed.
Read moreReturn policy: 30-day return with 15% restock from date of shipment applies only to standard products. IDC-USA Annual Return Policy
Disclaimer: The return policy information shown below is merely a copy of the text as stated in IDC-USA's Annual Return Policy.
File: http://documents.mrosupply.com/file_uploads/IDCreturnpolicy.pdf
ANNUAL RETURN POLICY PURPOSE: The purpose of IDC-USA’s Annual Return Policy is to allow IDC Distributors the opportunity to return salable stock merchandise of current design that may not have adequate “turns” and replace it with faster moving product.
ACCEPTANCE: IDC Owner-Distributors shall submit a return list to IDC-USA with all pertinent information as follows:
a. Product brand name
b. Quantity
c. IDC-USA’s product identification number
d. Corresponding distributor’s P.O. number or invoice number Acceptance of return shall be subject to IDC-USA inventory levels and manufacturer’s restrictions.
AUTHORIZATION: The return shall be audited and the IDC Owner-Distributor will receive an approved return list with a Return Material Authorization (RMA) number assigned to it. RETURN DATE: Each owner-distributor shall be assigned a month during which they shall be entitled to make a single annual return.
Product Qualification: All products returned must be:
a. On the current price list
b. In good resale condition
c. In the original packaging
d. Purchased from IDC-USA within 3 years of the return
e. Stock items only; no special order items
f. Only those items which have been approved
VALUE: The IDC Owner-Distributor shall receive a credit not to exceed 5% of the owner-distributor’s prior year annual purchases from the IDC Distribution Center. Credit received shall be the actual purchase price or price in effect at the time of the return, whichever is lowest, less applicable restocking charges. Additionally, all annual returns must have a minimum return value of $100.
RESTOCKING CHARGES: There will be a 15% restocking fee unless return is offset by a noncancelable order of equal value to be placed at the time of return. All items received that are not in their original box shall be subject to an additional 15% repackaging fee.
FREIGHT: Returns will be made freight prepaid by the IDC Owner-Distributor to the IDC Distribution Center. The packing slip and all cartons must reference the RMA number. The owner-distributor will be notified of any items received that do not qualify as set forth above. Those items will not be credited and shall be scrapped unless the IDC Owner-Distributor directs otherwise and assumes any additional transportation charges.