We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
SKF / CR Seals (formerly CR Seals) 180X210X15 HMS5 V is a HMS5 Single Lip radial shaft seal (lip seal) designed for 180mm shaft diameter, 210mm housing bore, and 15mm seal width. Constructed with a NBR sealing lip and spring-loaded garter spring for consistent radial sealing force. The V suffix indicates stainless steel outer case. Operating temperature range: -40°F to 250°F (-40°C to 121°C). Suitable for use in electric motors, gearboxes, pumps, and other rotating equipment.
MODEL 180X210X15 HMS5 V
Contact supplier for technical support on: 267-436-6000
$132.20 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Auxiliary lip
No
Design
HMS5
Housing bore diameter
210.0 mm, 8.268 in
Maximum operating temperature
200.0 °C, 392.0 °F
Maximum operating temperature (°F)
200.0 °C, 392.0
Minimum operating temperature
-20.0 °C, -4.0 °F
Minimum operating temperature (°F)
-20.0 °C, -4.0
Permissible circumferential speed
38.0 m/s
Rotational speed
3480.0 r/min
Seal width
15.0 mm, 0.591 in
Sealing lip material
Fluoro rubber (FKM)
Shaft diameter
180.0 mm, 7.087 in
Type of outside diameter
Rubber metal reinforced
Unit system
Metric
Radial shaft seal with rubber outside diameter and single sealing lip, for oil or grease
Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. HMS5 seals are designed with a rubber outside diameter. They have a conventional sealing lip made of elastomer with a garter spring to maintain the right radial load.
- High pumping rate
- With garter spring
- Accommodate misalignment
SKU: 301341
Great first impression
The site was easy to navigate. I placed the order and I was kept up to date with it’s processing and shipping progress. I would definitely use them again
Read moreSKU: 1898386
Small diameter seals
I use a lot of small diameter inch dimension seals for the repair of older chainsaws. MRO is a great resource for many seals with very competitive prices and free shipping for larger orders. I will continue to use MRO whenever I can.
Read more
| Brand | NTN Bearing |
| Model | CM-UCF213D1 |
| Brand | Carter |
| Model | SCE-28-SB |
| Brand | Precision Twist Drill |
| Model | 5999716 |
SKU: 301341
Great first impression
The site was easy to navigate. I placed the order and I was kept up to date with it’s processing and shipping progress. I would definitely use them again
Read moreSKU: 1898386
Small diameter seals
I use a lot of small diameter inch dimension seals for the repair of older chainsaws. MRO is a great resource for many seals with very competitive prices and free shipping for larger orders. I will continue to use MRO whenever I can.
Read moreDisclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF