Stop searching, install MROSupply Smart Check and see our price instantly wherever you browse.

Add products to your shopping cart

415991N

Image for Illustration purposes only. Actual product may vary

View in markdown

Timken 415991N small bore inch oil seal with nitrile (NBR) single lip and garter spring for consistent sealing pressure. Provides reliable fluid retention for shafts in pumps, motors, and gearboxes. Operates within -40°F to +250°F, suitable for general industrial applications involving petroleum-based oils and greases.

MODEL 415991N

BRAND

SKU

5068711

WEIGHT

0.347 lb

UOM

each

$33.90 Each

Prices are subject to change

FREE SHIPPING ON ORDERS OVER $100

Select Quantity

GET A QUOTE

Typically Ships in: 1 day

Returnable:No

11.887 mm Redicoat

Yes Series:410000 Shaft Size:3.5 in

114.325 mm Outer Diameter

4.506 in

114.452 mm Overall width

0.468 in

Housing bore

4.501 in

Housing Bore

4.501 in

Inch/Metric

Inch

Material

Polyacrylate

Outer Diameter

4.506 in

Overall Width

0.468 in

Redicoat

Yes

Series

410000

Shaft Size

3.5 in

Oil seals are used wherever shafts rotate and bearings require lubrication. Available in inch and metric sizes, the Timken line of O-Ring Seal Kits have the coverage you need for the most popular applications.

Oil Seals Inch

SKU: 5066946

Best company to buy from

I always buy from MRO is a very reliable company to work with

When will I be charged for my order?

Do you provide credit terms?

Can I get a discounted price? I am a reseller / government entity.

What is the return/warranty policy?

Can it be shipped today?

Does “Usually ships in 24 hours” mean it’s in stock?

Recently Viewed

#277159

AEL202-010D1

NTN AEL202-010D1 bearing insert with 1-1/4 in bore, double sealed, and set screw locking. Through hardened steel construction for durability in industrial applications such as conveyors and material handling equipment.

Brand	NTN Bearing
Model	AEL202-010D1

$26.76 Each

Free shipping

#6114666

C31281

Cleveland C31281 RG6-TC 1/2" cutter diameter heavy-duty square end mill with 1/2" shank diameter, 1/2" length of cut, and 2-1/2" overall length. Cobalt M42 (HSS-CO 8%) construction with TiCN (Titanium Carbonitride) coating for high heat resistance and extended tool life. 4-flute spiral design with 30° helix angle and right-hand cutting direction. Center cutting fine heavy duty single end configuration with straight/Weldon flat shank for secure tool holding.

Brand	Cleveland
Model	C31281

$79.18 Each

Free shipping

#5720134

1756-A13

Allen-Bradley 1756-A13 ControlLogix 13-slot chassis rack, Bulletin 1756 backplane for mounting controllers, I/O modules, communication adapters, and power supplies. Supports high-performance automation applications with a scalable modular foundation. Designed for DIN rail or panel mounting within industrial enclosures.

Brand	Allen Bradley
Model	1756-A13

$2,856.77 Each

Free Shipping orders over $100

#809434

MUCP207-21RF

AMI MUCP207-21RF 1-5/16" (33.338 mm) bore pillow block bearing with set screw locking, 304 cast stainless steel housing, and 440C stainless steel insert. Wide inner ring design, normal duty 200 series. Prime Plus corrosion protection for demanding washdown and chemical environments.

Brand	AMI Bearings
Model	MUCP207-21RF

$326.91 Each

Free Shipping orders over $100

#2337283

5L880

MasterDrive 5L880 5L section fractional horsepower V-belt, 88-inch outside length. Industrial neoprene compound with polyester tensile cord for light-duty drives in HVAC, agricultural, and general industrial equipment.

Brand	MasterDrive
Model	5L880

$16.18 Each

Free shipping

#18119

BLFL3

AMI BLFL3 two-bolt flange bearing unit with 17mm (0.669") bore and set screw locking. Narrow profile cast iron housing for space-constrained applications. Precision-ground insert bearing with grease fitting for reliable lubrication.

Brand	AMI Bearings
Model	BLFL3

$21.91 Each

Free shipping

#1422

UCFS319

AMI UCFS319 heavy-duty piloted four-bolt flange bearing with 1-3/16" bore, set-screw locking, and cast iron housing. Wide inner ring chrome steel insert for industrial shaft support. Piloted design ensures precise alignment in demanding applications.

Brand	AMI Bearings
Model	UCFS319

$884.31 Each

Free Shipping orders over $100

#6117773

C61059

Cleveland C61059 CEM-SE-2 solid carbide square end mill, 1/2" cutter diameter, 2-flute, bright uncoated finish, 35° helix, straight shank, right hand cut. Center cutting extra long length general purpose single end design with 3" length of cut and 6" overall length. Ideal for slotting, profiling, and peripheral milling in a wide range of materials.

Brand	Cleveland
Model	C61059

$114.13 Each

Free Shipping orders over $100

Reviews

SKU: 5066946

Best company to buy from

I always buy from MRO is a very reliable company to work with