We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 022716 D-FLEX Size 5J coupling flange with 3/4" bore. Sintered steel construction, bored-to-size shaft attachment. Maximum speed 7600 RPM. Type J elastomeric sleeve coupling component for low-cost flexible drive applications.
MODEL 022716
Contact supplier for technical support on: +1-864-284-5700
$27.28 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Angular misalignment
1.0000, 1.0
Axial misalignment
0.0920 in, 2.337 mm
Bore diameter actual
0.7500 in, 19.05 mm
Bore fit
Clearance
Bore length
1.0600 in, 26.924 mm
Bore tolerance standard
AGMA 9002
Coupling component
Flange
Coupling size
5
Coupling style
Sleeve
Coupling type
Elastomeric
Flange material
Aluminum
Horsepower per 100 rat
0.3800 hp, 0.283 kW
I.D.
3/4 in
Material
Sintered steel
Max RPM
7600 rpm
Max Speed
7600 rpm
Parallel misalignment
0.0150 in, 0.381 mm
Rated Torque
240.0000 lbf, 1067.573 N
Shaft attachment
Bored to size
Shaft spacing
Close coupled
- Coupling Type: D-FLEX elastomeric sleeve coupling
- Size: 5J
- Component: Flange half
- Bore Size: 3/4"
- Shaft Attachment: Bored-to-size
- Material: Sintered steel
- Maximum Speed: 7,600 RPM
- Weight: 0.94 lbs
- Application: Low-cost Type J coupling for light-duty flexible drive service with elastomeric element isolation
SKU: 115894
Excellent
We recently purchased a 30-year old hydroseeder and have no manuals or parts diagrams for it. The manufacturer is since out of business and there is very limited information on line. The most critical part we needed was a Dodge part. The original part was clearly marked with the Dodge name and part number. MRO was quickly able to identify the replacement part and we had in hand in two days. Perfect fit. Thank you MRO Supply for helping make our machine functional.
Read moreSKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read more
| Brand | Consolidated Bearings |
| Model | NJ-212E |
| Brand | Consolidated Bearings |
| Model | 20204 T |
SKU: 115894
Excellent
We recently purchased a 30-year old hydroseeder and have no manuals or parts diagrams for it. The manufacturer is since out of business and there is very limited information on line. The most critical part we needed was a Dodge part. The original part was clearly marked with the Dodge name and part number. MRO was quickly able to identify the replacement part and we had in hand in two days. Perfect fit. Thank you MRO Supply for helping make our machine functional.
Read moreSKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/