Gates 94140650 5VX650 Super HC Molded Notch V-Belt with 5VX cogged narrow-wedge section and 65.0" outside length. Designed for industrial drives requiring high flexibility and reduced bending stress on small-diameter sheaves. Molded notch construction dissipates heat and extends belt life in high-speed, high-tension applications.

• Flex-bonded tensile cords are vulcanized as one solid unit making the belt highly resistant to tensile and flexing forces, fatigue and shock loads.
• Precision-ground straight sidewalls give a uniform wedging action and ensure the belt fits correctly in the pulley grooves, which improves belt life and reduces expensive maintenance time.
• Patented Ethylene compound and optimized notches molded into the belt during manufacturing increase flexibility and transmission efficiency, which allows for a more compact and highly economical drive design by reducing size of pulleys, bearings, guards and mounts.
• Recommended for use on all industrial heavy-duty, narrow section V-belt drives. All sizes meet Gates V80 system matching tolerances.
• Meets ARPM/RMA IP-3-2 oil and heat resistant standards and IP-3-3 static conductivity requirements.REACH and RoHS 2 compliant.

A BOND FOR LIFE

Our proprietary manufacturing process and investments in material science created a power transmission solution that outperforms other options. Flex-Bonded Cords adhere strongly to the body of the belt, resulting in equal load distribution and absorption of bending stress without cord deterioration.

Features and Benefits

• Machined belt edge provides maximum sheave groove contact for even wear and extended belt life.
• Proprietary Flex-Weave cover protects the belt's interior from oil, contaminants, and heat.
• Promotes smoother, quieter operation, with less slippage and belt wear.
• Elastomeric compound protects the belt against heat, ozone and sunlight.
• Even with severe slippage, the belt will not catch fire from heat build-up.
• Designed for high horsepower, space-constrained applications.
• Improved belt life reducing expensive maintenance time.
• Optimally constructed for small sheave diameter drives.
• The molded notch pattern also reduces noise.
• Patented Ethylene Material construction.
• Temperature Range: -30°C to +60°C (-70°F to +250°F).
• More compact design compared to classical section V-belts.
• Cost and space savings by reducing size of pulleys, bearings, guards and mounts.
• Match system: all sizes meet Gates UNISET tolerances, they can be installed without matching.
• Static conductive (ISO 1813) and can as such be used in the conditions described in the Directive 2014/34/EU- ATEX.
• REACH and RoHS 2 compliant.

TIGHT SPACES CALL FOR INNOVATIVE SOLUTIONS

Gates Super HC Molded Notch Belts are constructed from a patented ethylene material that provides high temperature tolerance and exceptional strength. This enables our belts to deliver more horsepower, up to three times more, in less space, making them extremely versatile for a variety of manufacturing and field power transmission applications.