Image for Illustration purposes only. Actual product may vary
$321.54 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Orders over $500 qualify for a Free Gift
Typically Ships in: 1 day
Returnable: See conditions
Still Deciding?
Add this item to your saved items and easily come back later.
U Type Shaft-to-Shaft
The U Type is the basis for all Uniflex couplings. It is a shaft-to-shaft flexible coupling with a simple one piece design, making it ideal for indexing, robotic or positioning applications. The U Type consists of a triple-wound flexible steel spring brazed to a steel hub at each end. This all steel design ensures optimum equipment protection in severe environments and/or high temperature applications. Regular and short versions are available for most sizes to accommodate different overall length requirements. Special hub or bore modifications are also possible. These units can be supplied with either pin holes or with keyways and set screws. Lovejoy does not recommend the reboring of uniflex couplings by customers due to potential damage to the brazed joint.
This is a durable one-piece flexible coupling for general purpose shaft-to- shaft applications. It is the basis for all Uniflex coupling types.
Specifications
| Description | U50R CPLG 3/8X1/2 N/KW BE |
|---|---|
| Hub Style | Regular |
| Type | Shaft-to-Shaft |
| Material | Steel |
| Weight | 0.36 lb |
| Color | Gray/Metallic |
| Bore Type | Finished Bore |
Dimensional Data
| Bore Size | 3/8 x 1/2 in |
|---|---|
| Hub Size | U50R |
| Set Screw Thread Size (Dimension T) | 1/4-20 |
| Keyway Size (W x D) | No Keyway |
| Dimension HD | 1.040 in26.42 mm |
| Overall Length | 2.500 in63.50 mm |
| Pin Location (Dimension SL) | 0.310 in |
| Length thru Bore | 0.640 in16.26 mm |
| Min. Bore (Dimensions ID1/ID2) | 0.313 in8.00 mm |
| Max. Bore (Dimensions ID1/ID2) | 0.500 in12.70 mm |
| Cubic inches | 2.70400 in³ |
Performance Data
| Operating Temperature Range | -40 to 250 ºF |
|---|---|
| Max. Torque | 82 in·lb |
| Max. Speed | 30000.00 rpm |
| Axial Misalignment (∆ Ka) | 0.035 in0.89 mm |
| Max. Parallel Misalignment | 0.021 in0.53 mm |
| Wind-Up Angle at Nominal Torque | 1.82 º |
| Wind-Up Angle at Max. Torque | 4.5 º |
| Rated HP at 100 rpm | 0.13 hp |
| # of Set Screws Required per Hub | 1 |
Coupling Design
The Uniflex Coupling is an all steel, single piece coupling that solves a variety of application concerns including: high misalignment, space limitations, high temperature, and exceptionally low backlash/windup. The unique flexing center of the Uniflex consists of three opposingly wound square wire springs for forward or reverse operation. Two steel hubs are then brazed to the steel spring pack to create a durable one-piece flexible coupling.
Notes
Total backlash is approximately 1/3 of windup at maximum torque – consult Lovejoy Engineering for more information.
|
+ 1/8 inch. |
|---|
When you get to checkout, you’ll be able to select a free gift! Depending on the cart value, you’ll be shown relevant gifts your order qualifies for.
$500
MRO Hat
MRO Golf Balls
MRO Hi-Vis Vests
MRO Mug
$750
32oz Water Bottle
Throw Blanket
30 piece Hex Set
Telescopic Pick Up
$1,250
Golf Cooler
11-in-1 Screw Driver Set
Gorilla Grip Knee Pad
John Deere Oilskin Hat
$2,500
Igloo 1/2 Gallon Jug
Rechargable Headlamp
Larix Trucker Hat
$5,000
Igloo 10 Gallon Cooler
Igloo Party Bucket Cooler
Klein Tools Speaker
Klein Tools 8-in-1
$7,500
GX-6F Pro Golf Range Finder
Bushnell Outdoorsman Speaker
Jaeger 24px Ratcheting Wrench Set
Aspen Beverage Bucket
Item must be unused.
Item must be in it's original package.
Restocking, shipping and handling fees may applied to any return with this manufacturer.
For more information please consult https://www.mrosupply.com/page/returnwarranty-policy/