We never sell your data to third parties
TB Woods L22548MM L-Jaw coupling hub for size L225 with a 48 mm finished bore and 14 mm x 3.8 mm keyway. Cast-iron construction with straight jaw design, rated for speeds up to 4600 RPM. Pairs with a matching L-Jaw spider and second hub to form a complete flexible coupling.
MODEL L22548MM
Contact supplier for technical support on: 888-829-6637
$143.44 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Bore shape
Finish with keyway
Bore size
48 mm
Bore size (mm)
48
Bore tolerance
+.025/.050
Bore tolerance (in)
+.025MM/.050MM
Center
1
Coupling size
L225
Dimension (in) (HD)
4.25
Dimension (in) (LTB)
3.12
Dimension (in) (OD)
5.00
Dimension (in) (S)
3.12
Family ID
2,008
Family name
Jaw coupling
Hub diameter
4.25
Hub material
Cast iron
Jaw type
Straight
Keyseat
14MM X 3.8MM
Keyway
14 mm x 3.8 mm
Length-through-bore
56
Material type
Cast iron
Max compatible bore size
66
Max parallel misalignment
0
Max RPM
4,600
Max speed
4600
Min compatible bore size
20
O.D.
127
Overall length
137
Product description
L225 X 48mm
Product family
L-jaw hub
Setscrew length
0.625
Setscrew length frac (in)
0.625000
Setscrew size
7/16 14NC
Size code
225
Unit Of Measure
Metric
Description: TB Wood's L-Jaw couplings are designed to meet high-quality standards while remaining affordable. Available with four insert materials and three hub materials, L-Jaw couplings are 100% interchangeable with industry-standard designs.
SKU: 336840
Muy buen servicio y rapidez en la entrega
Primera vez q compro con esta compañía, recomiendo ampliamente comprar con ellos y claro q volveria a comprar otra vez muy buen servicio y entrega rapida
Read moreSKU: 832766
Didn’t use yet
I really didn’t use them yet but the belts I received were actually Carlisle belts which are made by Timken. I had ordered a belt that I knew was Carlisle at the same time to try out the difference brands and it was the same belt. The only difference was the TB Woods belt was $10 more per belt so you might as well just buy the Carlisle/ Timken directly.
Read more
#705659
Brand
Dodge
Model
L225X48MM
| Brand | AMI Bearings |
| Model | UCWTPL204-12MZ2B |
SKU: 336840
Muy buen servicio y rapidez en la entrega
Primera vez q compro con esta compañía, recomiendo ampliamente comprar con ellos y claro q volveria a comprar otra vez muy buen servicio y entrega rapida
Read moreSKU: 832766
Didn’t use yet
I really didn’t use them yet but the belts I received were actually Carlisle belts which are made by Timken. I had ordered a belt that I knew was Carlisle at the same time to try out the difference brands and it was the same belt. The only difference was the TB Woods belt was $10 more per belt so you might as well just buy the Carlisle/ Timken directly.
Read moreDisclaimer: The return policy information shown below is merely a copy of the text as stated in TB Wood's Terms and Conditions.
File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Terms%20and%20Conditions.html
3. Claims for refunds or replacements must be made to the factory. Products may be returned only after written approval and a returned goods authorization number has been received from Customer Service or Application Engineering. Return shipments must be prepaid (Refer to Returned Goods Policy). Final decision about refund or replacement rests solely with TB Wood's Incorporated.
--
Disclaimer: The return policy featured below is for distributors only. Also, it is merely a copy of the text from TB Wood's Distributor Policy and Procedures.
File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Distributor%20Policies%20and%20Procedures.pdf
Returned Goods
The policy for returning products for defects in workmanship or materials is covered under the “Product Reliability” section.
Distributors and, occasionally, OEMs may want to return products that are overstocked or slow moving. Prior approval and a returned goods authorization number must be obtained from Customer Service or Application Engineering. This number must be referenced on the returned goods shipment. It allows us to identify the contents of the shipment, the Distributor who originated it and the reason for return. Freight must be prepaid.
Products returned for reasons other than factory authorized stock adjustments must have approval from Customer Service or Application Engineering and a returned goods authorization number. They must be sent by prepaid freight and will be subject to a 15% restocking charge. There will be additional charges as necessary for re-boxing and refurbishing. Returned goods must have been manufactured and/or sold by TB Wood’s Incorporated and must be in salable condition. They will be inspected at the factory and if reconditioning is necessary it will be charged to the Distributor. We reserve the right to reject unsalable products.
No products will be accepted for return or exchange if they are obsolete.