MROSupply Has Hundreds Of Brands, Millions Of Products, Including
Image for Illustration purposes only. Actual product may vary
TBWOODS 6HS Split Hytrel SF Sleeve
MODEL 6HS
Contact supplier for technical support on: 888-829-6637
$111.51 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Orders over $500 qualify for a Free Gift
Typically Ships in: 1 day
Returnable: See conditions
Component WR2 (lbs ft2)
0.0066
Component WR²
0.0066
Coupling size
6
Dimension (in) (D)
3 3/4
Dimension (in) (W)
1-7/8
Horsepower Rating at 100 RPM
2.9
Horsepower rating at 1150 RPM
33
Horsepower rating at 1200 RPM
34
Horsepower rating at 1750 RPM
50
Horsepower rating at 1800 RPM
51
Horsepower rating at 300 RPM
8.6
Horsepower rating at 3450 RPM
99
Horsepower rating at 3600 RPM
99
Horsepower rating at 50 RPM
11
Horsepower rating at 690 RPM
20
Horsepower rating at 870 RPM
25
Insert design
Two-Piece Split
KW rating at 100 RPM
2.1
KW rating at 1450 RPM
31
KW rating at 3000 RPM
64
KW rating at 970 RPM
21
Material type
Hytrel
Max angular gap misalignment
0.016 in
Max angular misalignment
1/4°
Max compatible bore size
1.875
Max parallel misalignment
1
Max RPM
6000
Max speed
6000
Maximum angular gap misalignment (in)
0.016
Maximum parallel misalignment (in)
0.01
Min compatible bore size
0.625
Operating temperature
-65°F to +250°F
Outside diameter
3.75
Power rating at 100 RPM
2.1 kW
Screw type
Sleeve, Two-Piece
Sleeve width
1.875
Stiffness
1130
Stiffness (in lbs rad)
10000
Temperature rating
-65°F to 250°F
Temperature rating (F)
+250ºF to -65ºF
Torque
1,800 in-lb
Torque rate
203
Torque rating (in lbs)
1800
Torsional stiffness
10000
SKU: 336840
Muy buen servicio y rapidez en la entrega
Primera vez q compro con esta compañía, recomiendo ampliamente comprar con ellos y claro q volveria a comprar otra vez muy buen servicio y entrega rapida
Read moreWhen you get to checkout, you’ll be able to select a free gift! Depending on the cart value, you’ll be shown relevant gifts your order qualifies for.
$500
MRO Hat
MRO Golf Balls
MRO Hi-Vis Vests
MRO Mug
$750
32oz Water Bottle
Throw Blanket
30 piece Hex Set
Telescopic Pick Up
$1,250
Golf Cooler
11-in-1 Screw Driver Set
Gorilla Grip Knee Pad
John Deere Oilskin Hat
$2,500
Igloo 1/2 Gallon Jug
Rechargable Headlamp
Larix Trucker Hat
$5,000
Igloo 10 Gallon Cooler
Igloo Party Bucket Cooler
Klein Tools Speaker
Klein Tools 8-in-1
$7,500
GX-6F Pro Golf Range Finder
Bushnell Outdoorsman Speaker
Jaeger 24px Ratcheting Wrench Set
Aspen Beverage Bucket
| Brand | FYH Bearing |
| Model | UCPH203 17MMLII |
| Brand | Hubbell Wiring |
| Model | HBL4MG620 |
| Brand | Cutler Hammer |
| Model | 2D82302G02 |
| Brand | Flowdrill |
| Model | 110940 |
| Brand | LSIS |
| Model | 02140776UL |
SKU: 336840
Muy buen servicio y rapidez en la entrega
Primera vez q compro con esta compañía, recomiendo ampliamente comprar con ellos y claro q volveria a comprar otra vez muy buen servicio y entrega rapida
Read moreDisclaimer: The return policy information shown below is merely a copy of the text as stated in TB Wood's Terms and Conditions.
File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Terms%20and%20Conditions.html
3. Claims for refunds or replacements must be made to the factory. Products may be returned only after written approval and a returned goods authorization number has been received from Customer Service or Application Engineering. Return shipments must be prepaid (Refer to Returned Goods Policy). Final decision about refund or replacement rests solely with TB Wood's Incorporated.
--
Disclaimer: The return policy featured below is for distributors only. Also, it is merely a copy of the text from TB Wood's Distributor Policy and Procedures.
File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Distributor%20Policies%20and%20Procedures.pdf
Returned Goods
The policy for returning products for defects in workmanship or materials is covered under the “Product Reliability” section.
Distributors and, occasionally, OEMs may want to return products that are overstocked or slow moving. Prior approval and a returned goods authorization number must be obtained from Customer Service or Application Engineering. This number must be referenced on the returned goods shipment. It allows us to identify the contents of the shipment, the Distributor who originated it and the reason for return. Freight must be prepaid.
Products returned for reasons other than factory authorized stock adjustments must have approval from Customer Service or Application Engineering and a returned goods authorization number. They must be sent by prepaid freight and will be subject to a 15% restocking charge. There will be additional charges as necessary for re-boxing and refurbishing. Returned goods must have been manufactured and/or sold by TB Wood’s Incorporated and must be in salable condition. They will be inspected at the factory and if reconditioning is necessary it will be charged to the Distributor. We reserve the right to reject unsalable products.
No products will be accepted for return or exchange if they are obsolete.