We never sell your data to third parties
TB Woods 6C178 Sure-Flex Plus Type C flange with 1-7/8" finished bore for Size 6 elastomeric sleeve couplings. High-strength cast-iron construction with setscrew and clamp screw. Compatible with EPDM, Neoprene, Hytrel, and Urethane sleeves; rated 585 in-lb continuous torque with EPDM or Neoprene and 1,800 in-lb with Hytrel.
MODEL 6C178
Contact supplier for technical support on: 888-829-6637
$185.96 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Bore size
1 7/8 in
Bore size (in)
1-7/8
Bore tolerance
+.0005 to +.0015
Bore tolerance (in)
+0.0005 to +0.0015
Capscrew size
1/4 20 NC X 1 1/4
Capscrew size (in)
1/4 20 NC X 1 1/4
Capscrew torque requirement
5
Capscrew torque requirment (ft lbs)
15
Component WR2 (lbs ft2)
0.0357
Component WR²
0.0357
Construction type
Finish bore with keyway
Coupling size
6
Dimension (in) (C)
1-15/16
Dimension (in) (D)
4.00
Dimension (in) (H)
3.0
Dimension (in) (S)
3/8
Dimension (in.) (E)
1.16
Flange diameter
4
Horsepower Rating at 100 RPM
47
Keyseat (in)
1/2 x 1/16
Keyseat size
1/2 in x 1/16 in
Length through bore
1.9375
Material type
High strength cast iron
Max angular gap misalignment
0.070 (in) with EPDM/Neoprene Sleeves and 0.016 (in) with Hytrel Sleeves
Max angular misalignment
1° with EPDM/neoprene sleeves and 1/4° with hytrel sleeves
Max compatible bore size
1.875
Max parallel misalignment
4
Max RPM
6000
Max speed
6000
Min compatible bore size
0.625
Outside diameter
4
Power rating at 100 RPM
0.69 kW with EPDM or Neoprene sleeve, 2.1 kW with Hytrel sleeve
Screw size
Setscrew
Screw type
Flange, Clamp
Set screw distance
0.375
Setscrew length
0.5
Setscrew length (in)
1/2
Setscrew size, location
5/16 18 UNC, over keyseat
Setscrew torque requirement
13
Setscrew Torque Requirment (ft lbs)
13
SF flange length
0.78125
SF hub diameter
3
SF hub length
25
Torque
585 in-lb with EPDM or Neoprene sleeve, 1,800 in-lb with Hytrel sleeve
Torque rate
585 (in-lbs) with EPDM or Neoprene sleeve; 1,800 (in-lbs) with Hytrel sleeve
Shaft Couplings and Collars The TB Woods 6C178 6CX1 7/8 SF Flange is a high-quality shaft coupling designed to effectively transmit torque and accommodate misalignment in various industrial applications. Known for its reliability and performance, this coupling is engineered to meet the demanding standards of modern power transmission systems.
Key Features
| Precision Engineering | The 6C178 coupling features a robust design that ensures precise alignment and effective torque transmission, minimizing wear and extending service life. |
|---|---|
| Durable Construction | Made from high-strength materials, this coupling is built to withstand harsh operational environments, ensuring long-lasting durability. |
| Elastomeric Sleeves | Incorporates TB Woods' proprietary elastomeric sleeves that offer superior flexibility and shock absorption, enhancing overall performance. |
| Versatile Compatibility | Designed for use with a variety of shaft sizes, making it suitable for diverse applications across multiple industries. |
| Easy Installation | The user-friendly design allows for quick and straightforward installation without the need for specialized tools. |
Applications
| Industrial Machinery | Ideal for connecting motors to pumps, fans, and other rotating equipment in manufacturing settings. |
|---|---|
| Material Handling | Effectively used in conveyor systems and other material handling equipment where reliable torque transmission is crucial. |
| Energy Sector | Well-suited for applications in power generation and distribution, ensuring efficient operation and reliability. |
Benefits
| Enhanced Performance | Provides smooth operation and reduces vibration, leading to improved efficiency and reduced maintenance costs. |
|---|---|
| Increased Reliability | The high-quality construction and innovative design minimize failure rates, ensuring consistent performance under demanding conditions. |
| Cost-Effective Solution | Designed to lower operational costs through reduced downtime and maintenance, contributing to overall productivity improvements. |
SKU: 832766
Didn’t use yet
I really didn’t use them yet but the belts I received were actually Carlisle belts which are made by Timken. I had ordered a belt that I knew was Carlisle at the same time to try out the difference brands and it was the same belt. The only difference was the TB Woods belt was $10 more per belt so you might as well just buy the Carlisle/ Timken directly.
Read more
#117510
Brand
Dodge
Model
004531
| Brand | Boston Gear |
| Model | QB1016 |
| Brand | Rollway |
| Model | 6305 ZZ C3 EMQ |
| Brand | Rollway |
| Model | 6204 ZZ C3 EMQ |
SKU: 832766
Didn’t use yet
I really didn’t use them yet but the belts I received were actually Carlisle belts which are made by Timken. I had ordered a belt that I knew was Carlisle at the same time to try out the difference brands and it was the same belt. The only difference was the TB Woods belt was $10 more per belt so you might as well just buy the Carlisle/ Timken directly.
Read moreDisclaimer: The return policy information shown below is merely a copy of the text as stated in TB Wood's Terms and Conditions.
File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Terms%20and%20Conditions.html
3. Claims for refunds or replacements must be made to the factory. Products may be returned only after written approval and a returned goods authorization number has been received from Customer Service or Application Engineering. Return shipments must be prepaid (Refer to Returned Goods Policy). Final decision about refund or replacement rests solely with TB Wood's Incorporated.
--
Disclaimer: The return policy featured below is for distributors only. Also, it is merely a copy of the text from TB Wood's Distributor Policy and Procedures.
File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Distributor%20Policies%20and%20Procedures.pdf
Returned Goods
The policy for returning products for defects in workmanship or materials is covered under the “Product Reliability” section.
Distributors and, occasionally, OEMs may want to return products that are overstocked or slow moving. Prior approval and a returned goods authorization number must be obtained from Customer Service or Application Engineering. This number must be referenced on the returned goods shipment. It allows us to identify the contents of the shipment, the Distributor who originated it and the reason for return. Freight must be prepaid.
Products returned for reasons other than factory authorized stock adjustments must have approval from Customer Service or Application Engineering and a returned goods authorization number. They must be sent by prepaid freight and will be subject to a 15% restocking charge. There will be additional charges as necessary for re-boxing and refurbishing. Returned goods must have been manufactured and/or sold by TB Wood’s Incorporated and must be in salable condition. They will be inspected at the factory and if reconditioning is necessary it will be charged to the Distributor. We reserve the right to reject unsalable products.
No products will be accepted for return or exchange if they are obsolete.