We never sell your data to third parties
TB Woods 9C214 Sure-Flex Plus Type C flange with 2-1/4" finished bore for Size 9 elastomeric sleeve couplings. High-strength cast-iron construction with setscrew clamping. Compatible with EPDM, Neoprene, Hytrel, and Urethane sleeves; rated up to 2,340 in-lb continuous torque with EPDM/Neoprene and 7,200 in-lb with Hytrel.
MODEL 9C214
Contact supplier for technical support on: 888-829-6637
$310.09 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Bore size
2 1/4 in
Bore size (in)
2 1/4
Bore tolerance
+.0005 to +.0020
Bore tolerance (in)
+0.0005 to +0.0020
Capscrew size
3/8 24 NF X 1 1/4
Capscrew size (in)
3/8 24 NF X 1 1/4
Capscrew torque requirement
55 in-lbs
Capscrew torque requirment (ft lbs)
55
Component WR2 (lbs ft2)
0.2758
Component WR²
0.2758
Construction type
Finish bore with keyway
Coupling size
9
Dimension (in) (C)
3
Dimension (in) (D)
7.5
Dimension (in) (H)
4.25
Dimension (in) (S)
1/2
Dimension (in.) (E)
1.97
Flange diameter
6.35
Horsepower Rating at 100 RPM
57
Keyseat (in)
1/2 x 1/4
Keyseat size
1/2 in x 1/4 in
Length through bore
3
Material type
High strength cast iron
Max angular gap misalignment
0.109 (in) with EPDM/Neoprene Sleeves and 0.028 (in) with Hytrel Sleeves
Max angular misalignment
1° with EPDM/neoprene sleeves and 1/4° with hytrel sleeves
Max compatible bore size
2.875
Max parallel misalignment
11
Max RPM
3750
Max speed
3750
Min compatible bore size
0.4375
Outside diameter
7.5
Power rating at 100 RPM
2.8 kW with EPDM or Neoprene sleeve, 8.5 kW with Hytrel sleeve
Screw size
Setscrew
Screw type
Flange, Clamp
Set screw distance
0.5
Setscrew length
0.75
Setscrew length (in)
3/4
Setscrew size, location
5/16 18 UNC, over keyseat
Setscrew torque requirement
13
Setscrew Torque Requirment (ft lbs)
13
SF flange length
1.03125
SF hub diameter
4.25
SF hub length
38
Torque
2,340 in-lb with EPDM or Neoprene sleeve, 7,200 in-lb with Hytrel sleeve
Torque rate
2,340 (in-lbs) with EPDM or Neoprene sleeve; 7,200 (in-lbs) with Hytrel sleeve
Shaft Couplings and Collars The TB Woods 9C214 9CX2 1/4 SF Flange is a high-quality shaft coupling designed for reliable performance in demanding industrial applications. Engineered to provide exceptional torque transmission, this coupling is part of the Sure-Flex Plus elastomeric coupling series, known for its durability and flexibility. Its innovative design ensures optimal alignment and minimizes vibration, making it ideal for various power transmission needs.
Key Features
| Durable Construction | Manufactured using proprietary elastomeric materials that enhance performance and longevity, ensuring reduced maintenance needs. |
|---|---|
| High Torque Capacity | Capable of handling significant torque loads, making it suitable for heavy-duty applications across multiple industries. |
| Versatile Design | Compatible with a wide range of shaft sizes and configurations, allowing for easy integration into existing systems. |
| Vibration Dampening | The elastomeric design effectively absorbs shock and vibration, protecting connected machinery and extending service life. |
| Easy Installation | Designed for straightforward installation, reducing downtime and simplifying maintenance procedures. |
Applications
| Industrial Machinery | Ideal for use in conveyors, pumps, and compressors where reliable torque transmission and flexibility are essential. |
|---|---|
| Material Handling | Commonly used in material handling equipment, providing seamless operation in demanding environments. |
| Energy Sector | Suitable for applications within the energy sector, including wind and solar power systems, where efficiency and reliability are crucial. |
Benefits
| Increased Reliability | Minimizes downtime with superior performance in high-stress applications, ensuring continuous operation. |
|---|---|
| Cost Efficiency | The durable design leads to lower maintenance costs and extended service intervals, contributing to overall cost savings. |
| Enhanced Performance | The elastomeric coupling design optimizes power transmission while reducing backlash and ensuring smooth operation. |
SKU: 336840
Muy buen servicio y rapidez en la entrega
Primera vez q compro con esta compañía, recomiendo ampliamente comprar con ellos y claro q volveria a comprar otra vez muy buen servicio y entrega rapida
Read moreSKU: 832766
Didn’t use yet
I really didn’t use them yet but the belts I received were actually Carlisle belts which are made by Timken. I had ordered a belt that I knew was Carlisle at the same time to try out the difference brands and it was the same belt. The only difference was the TB Woods belt was $10 more per belt so you might as well just buy the Carlisle/ Timken directly.
Read more
SKU: 336840
Muy buen servicio y rapidez en la entrega
Primera vez q compro con esta compañía, recomiendo ampliamente comprar con ellos y claro q volveria a comprar otra vez muy buen servicio y entrega rapida
Read moreSKU: 832766
Didn’t use yet
I really didn’t use them yet but the belts I received were actually Carlisle belts which are made by Timken. I had ordered a belt that I knew was Carlisle at the same time to try out the difference brands and it was the same belt. The only difference was the TB Woods belt was $10 more per belt so you might as well just buy the Carlisle/ Timken directly.
Read moreDisclaimer: The return policy information shown below is merely a copy of the text as stated in TB Wood's Terms and Conditions.
File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Terms%20and%20Conditions.html
3. Claims for refunds or replacements must be made to the factory. Products may be returned only after written approval and a returned goods authorization number has been received from Customer Service or Application Engineering. Return shipments must be prepaid (Refer to Returned Goods Policy). Final decision about refund or replacement rests solely with TB Wood's Incorporated.
--
Disclaimer: The return policy featured below is for distributors only. Also, it is merely a copy of the text from TB Wood's Distributor Policy and Procedures.
File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Distributor%20Policies%20and%20Procedures.pdf
Returned Goods
The policy for returning products for defects in workmanship or materials is covered under the “Product Reliability” section.
Distributors and, occasionally, OEMs may want to return products that are overstocked or slow moving. Prior approval and a returned goods authorization number must be obtained from Customer Service or Application Engineering. This number must be referenced on the returned goods shipment. It allows us to identify the contents of the shipment, the Distributor who originated it and the reason for return. Freight must be prepaid.
Products returned for reasons other than factory authorized stock adjustments must have approval from Customer Service or Application Engineering and a returned goods authorization number. They must be sent by prepaid freight and will be subject to a 15% restocking charge. There will be additional charges as necessary for re-boxing and refurbishing. Returned goods must have been manufactured and/or sold by TB Wood’s Incorporated and must be in salable condition. They will be inspected at the factory and if reconditioning is necessary it will be charged to the Distributor. We reserve the right to reject unsalable products.
No products will be accepted for return or exchange if they are obsolete.