We never sell your data to third parties
TB Woods 8S178 Sure-Flex Plus Type S flange for Size 8 elastomeric sleeve couplings with a 1-7/8" finished bore and 1/2" x 1/4" keyseat. High-strength cast-iron construction rated for 1,475 in-lb torque with EPDM or Neoprene sleeves and 4,530 in-lb with Hytrel sleeves at up to 4,500 RPM.
MODEL 8S178
Contact supplier for technical support on: 888-829-6637
$61.73 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Bore size
1 7/8 in
Bore size (in)
1-7/8
Bore tolerance
+.0005 to +.0015
Bore tolerance (in)
+0.0005 to +0.0015
Component WR2 (lbs ft2)
0.1041
Component WR²
0.1041
Construction type
Finish bore with keyway
Coupling size
8
Dimension (in) (C)
2 3/32
Dimension (in) (D)
5.45
Dimension (in) (H)
3-1/4
Dimension (in) (S)
3/8
Dimension (in) (T)
29/32
Dimension (in.) (E)
3/4
Flange diameter
5.45
Horsepower Rating at 100 RPM
52
Keyseat (in)
1/2 x 1/4
Keyseat size
1/2 in x 1/4 in
Length through bore
2.09375
Material type
High strength cast iron
Max angular gap misalignment
0.094 (in) with EPDM/Neoprene Sleeves and 0.025 (in) with Hytrel Sleeves
Max angular misalignment
1° with EPDM/neoprene sleeves and 1/4° with hytrel sleeves
Max compatible bore size
2.375
Max parallel misalignment
8
Max RPM
4500
Max speed
4500
Min compatible bore size
0.4375
Outside diameter
5.45
Power rating at 100 RPM
1.8 kW with EPDM or Neoprene sleeve, 5.4 kW with Hytrel sleeve
Screw size
Setscrew
Screw type
Flange, Type S
Set screw distance
0.375
Setscrew length
0.375
Setscrew length (in)
3/8
Setscrew size, location
3/8 16 UNC, One over KS and at 90 Degrees
Setscrew torque requirement
23
Setscrew Torque Requirment (ft lbs)
23
SF flange length
0.90625
SF hub diameter
3.25
SF hub length
3/4
Torque
1,475 in-lb with EPDM or Neoprene sleeve, 4,530 in-lb with Hytrel sleeve
Torque rate
1,475 (in-lbs) with EPDM or Neoprene sleeve; 4,530 (in-lbs) with Hytrel sleeve
Key Features • Material Composition: Constructed from premium-grade materials for enhanced strength and longevity. • Size Specification: Features a 7/8 inch bore size, allowing for versatile application across multiple equipment types. • Design: The SF flange design allows for easy installation and alignment, reducing downtime during maintenance. • Load Capacity: Engineered to accommodate high torque loads while minimizing wear and tear on connected components. • Compatibility: Designed to work seamlessly with other TB Woods couplings and drive systems, ensuring comprehensive power transmission solutions.
Applications • Industrial Machinery: Ideal for use in conveyors, pumps, and other industrial equipment where reliable power transmission is crucial. • Food and Beverage: Suitable for applications in food processing where hygiene and durability are essential. • Material Handling: Efficiently connects shafts in material handling systems, improving operational reliability.
Benefits • Enhanced Performance: Optimized for high-performance applications, ensuring consistent operation under varying loads. • Durability: The robust construction minimizes the risk of failure, extending the lifespan of both the coupling and the connected equipment. • Maintenance Savings: The easy-to-install design reduces maintenance time and costs, allowing for more efficient operations. --- *Product information compiled with AI assistance for reference purposes.*
SKU: 336840
Muy buen servicio y rapidez en la entrega
Primera vez q compro con esta compañía, recomiendo ampliamente comprar con ellos y claro q volveria a comprar otra vez muy buen servicio y entrega rapida
Read moreSKU: 832766
Didn’t use yet
I really didn’t use them yet but the belts I received were actually Carlisle belts which are made by Timken. I had ordered a belt that I knew was Carlisle at the same time to try out the difference brands and it was the same belt. The only difference was the TB Woods belt was $10 more per belt so you might as well just buy the Carlisle/ Timken directly.
Read more
#250165
Brand
Martin Sprocket
Model
8S 1 7/8
SKU: 336840
Muy buen servicio y rapidez en la entrega
Primera vez q compro con esta compañía, recomiendo ampliamente comprar con ellos y claro q volveria a comprar otra vez muy buen servicio y entrega rapida
Read moreSKU: 832766
Didn’t use yet
I really didn’t use them yet but the belts I received were actually Carlisle belts which are made by Timken. I had ordered a belt that I knew was Carlisle at the same time to try out the difference brands and it was the same belt. The only difference was the TB Woods belt was $10 more per belt so you might as well just buy the Carlisle/ Timken directly.
Read moreDisclaimer: The return policy information shown below is merely a copy of the text as stated in TB Wood's Terms and Conditions.
File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Terms%20and%20Conditions.html
3. Claims for refunds or replacements must be made to the factory. Products may be returned only after written approval and a returned goods authorization number has been received from Customer Service or Application Engineering. Return shipments must be prepaid (Refer to Returned Goods Policy). Final decision about refund or replacement rests solely with TB Wood's Incorporated.
--
Disclaimer: The return policy featured below is for distributors only. Also, it is merely a copy of the text from TB Wood's Distributor Policy and Procedures.
File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Distributor%20Policies%20and%20Procedures.pdf
Returned Goods
The policy for returning products for defects in workmanship or materials is covered under the “Product Reliability” section.
Distributors and, occasionally, OEMs may want to return products that are overstocked or slow moving. Prior approval and a returned goods authorization number must be obtained from Customer Service or Application Engineering. This number must be referenced on the returned goods shipment. It allows us to identify the contents of the shipment, the Distributor who originated it and the reason for return. Freight must be prepaid.
Products returned for reasons other than factory authorized stock adjustments must have approval from Customer Service or Application Engineering and a returned goods authorization number. They must be sent by prepaid freight and will be subject to a 15% restocking charge. There will be additional charges as necessary for re-boxing and refurbishing. Returned goods must have been manufactured and/or sold by TB Wood’s Incorporated and must be in salable condition. They will be inspected at the factory and if reconditioning is necessary it will be charged to the Distributor. We reserve the right to reject unsalable products.
No products will be accepted for return or exchange if they are obsolete.